No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_snap_control status

show fs_snap_control status

Function

The show fs_snap_control status command is used to view the background status of a specific file system snapshot.

Format

show fs_snap_control status file_system_id=? command_type=? controller=?

Parameters

Parameter

Description

Value

command_type=?

Type of the task that you want to query.

The value can be "schedule", "back_ground_status", or "auto_delete_switch", where:

  • "schedule": scheduled policy.
  • "back_ground_status": background task status.
  • "auto_delete_switch": automatic deletion switch.

file_system_id=?

ID of the file system to which the snapshot to be queried belongs.

To obtain the value, run the "show file_system general" command.

controller=?

ID of a controller.

To obtain the value, run "show controller general".

Views

Developer view

Usage Guidelines

  • Before performing this operation, check whether the background task status to be queried is correct.
  • Before performing this operation, check whether the file system ID to be queried is correct.

Example

Status of a specific file system snapshot schedule.

developer:/>show fs_snap_control status file_system_id=0 command_type=schedule controller=0A 
Type : 1 
Bitmap : 0 
Minutes : 0 
Status : -- 
Background Running Number : -- 
Auto Delete Task ID : -- 
Auto Delete Running : -- 
FS Status : -- 
Auto Delete Switch : --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Type

Schedule type.

Bitmap

Bitmap.

Minutes

Time interval.

Auto Delete Running

Automatic deletion is running.

FS Status

Status of the file system.

Background Running Number

Number of background running tasks.

Auto Delete Task ID

ID of automatic deletion tasks.

Status

Status of the schedule.

Auto Delete Switch

Switch of automatic deletion.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 586918

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next