No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain pause_schedule_leveling

change disk_domain pause_schedule_leveling

Function

The change disk_domain pause_schedule_leveling command is used to suspend the scheduling of new leveling tasks on the local controller within a specified period of time.

Format

change disk_domain pause_schedule_leveling time=?

Parameters

Parameter

Description

Value

time=?

Time of new leveling task suspension, expressed in hours.

The value is an integer ranging from 0 to 240.

Views

Developer view

Usage Guidelines

None

Example

Suspend the scheduling of new leveling tasks within 1 hour.

developer:/>change disk_domain pause_schedule_leveling time=1 
CAUTION: You are about to suspend the scheduling of new leveling tasks on the local controller . 
This command is used to prevent the startup of new balancing tasks on the local controller within the specified time. If you want to prevent the startup of new balancing tasks in the entire system, run this command on all controllers. 
Suggestion: Before running this command, determine whether the startup of new balancing tasks on the local controller needs to be prevented. 
Do you wish to continue?(y/n)y 
Command executed successfully. 
developer:/>

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 584995

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next