No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_snap_control all_task_info

show fs_snap_control all_task_info

Function

The show fs_snap_control all_task_info command is used to view all snapshot commands executed for a specific file system or specific file system snapshot.

Format

show fs_snap_control all_task_info file_system_id=? controller=? [ start_task_id=? ]

Parameters

Parameter

Description

Value

file_system_id=?

ID of the file system to which the snapshot to be queried belongs.

To obtain the value, run the "show file_system general" command.

start_task_id=?

Start task ID of the file system to which the snapshot to be queried belongs.

To obtain the value, run the "show fs_snap_control action" command.

controller=?

ID of a controller.

To obtain the value, run "show controller general".

Views

Developer view

Usage Guidelines

  • Before performing this operation, check whether the file system ID to be queried is correct.
  • Before performing this operation, check whether the task start ID to be queried is correct.

Example

View execution status of all snapshot commands after a specific start task ID of a specific file system.

developer:/>show fs_snap_control all_task_info file_system_id=0 controller=0A start_task_id=3 
Task ID Start Time End Time Type  
------- ------------------- ------------------- -----------------------  
3 2015-04-30 01:28:08 2015-04-30 01:28:08 SNAP_CTASK_FS_GET_BATCH  
4 2015-04-30 01:31:54 2015-04-30 01:31:54 SNAP_CTASK_FS_GET_BATCH  
5 2015-04-30 01:36:26 2015-04-30 01:36:26 SNAP_CTASK_FS_GET_BATCH  
7 2015-04-30 01:37:21 2015-04-30 01:37:21 UNKNOWN  
8 2015-04-30 01:37:54 2015-04-30 01:37:54 SNAP_CTASK_FS_GET_BATCH  
9 2015-04-30 01:39:56 2015-04-30 01:39:56 UNKNOWN  
10 2015-04-30 01:39:59 2015-04-30 01:39:59 SNAP_CTASK_FS_CREATE

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Start Time

Start time.

End Time

End time.

Task ID

Task ID.

Type

Task type.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632992

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next