No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliset -d bmcreset

cliset -d bmcreset

Function

The cliset -d bmcreset command is used to reset the BMC.

Format

cliset -d bmcreset

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Resetting the BMC.

administrator@SMM_3U / $ cliset -d bmcreset 
****reset bmc*** 
[ Frameboard ] Rebooting...module Frameboard closed. 
[ log ] Rebooting...module log closed. 
 BOARDCTRL Start!![ Board ] Rebooting...module Board closed. 
[ FanCell ] Rebooting...module FanCell closed. 
[ BBU ] Rebooting...module BBU closed. 
administrator@SMM_3U / $ [ Led ] Rebooting...module Led closed. 
[ User ] Rebooting...module User closed. 
[ Sensor ] Rebooting...module Sensor closed. 
[ Upgrade ] Rebooting...module Upgrade closed. 
[ SMMmgt ] Rebooting...module SMMmgt closed. 
[ sysctrl ] Rebooting...module sysctrl closed. 
[ diagnose ] Rebooting...module diagnose closed. 
[ fru_iocard_big ] Rebooting...module fru_iocard_big closed. 
[ Ear ] Rebooting...module Ear closed. 
[ PowerFru ] Rebooting...module PowerFru closed. 
[ Fru_IOCard ] Rebooting...module Fru_IOCard closed. 
[ fault_info ] Rebooting...module fault_info closed. 
[ Fru_FanCtrlBoard ] Rebooting...module Fru_FanCtrlBoard closed. 
[ ipmi_app ] Rebooting...module ipmi_app closed. 
[ Fru_Fan ] Rebooting...module Fru_Fan closed. 
[ asd ] Rebooting...module asd closed. 
[ MPA_IPMI_APP ] Rebooting...module MPA_IPMI_APP closed. 
[ MaintDebug ] Rebooting...module MaintDebug closed. 
[ cooling ] Rebooting...module cooling closed. 
[ FileManage ] Rebooting...module FileManage closed. 
[ uart ] Rebooting...module uart closed. 
System is going down for reboot or halt now.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 590343

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next