No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eam showport

eam showport

Function

The eam showport command is used to query the port information of EAM based on the port name.

Format

eam showport [port_name]

Parameters

Parameter

Description

Value

port_name

Port name.

To obtain the value, run the "show port general" command in the guest view.

Views

Diagnostic view

Usage Guidelines

None

Example

  • Query the information about Ethernet ports.
    admin:/diagnose>eam showport CTE0.A.H0 
    ------------Show port begin---------- 
    type name=ETH 
    size=256 
    extPortId=0x22003 
    portName=CTE0.A.H0 
    phyStatus=1 
    linkStatus=10 
    linkQuality=0 
    tmpFlag=0 
    shutdown=1 
    portType=1 
    logicType=0 
    protocolType=3 
    node=0 
    maxSpeed=2 
    runSpeed=2 
    drvName=H0 
    uptime=17406144 
    bondId=0x21f01 
    ------------Show port end---------- 
    admin:/diagnose>
  • Query the information about bond ports.
    admin:/diagnose>eam showport kk 
    ------------Show port begin---------- 
    type name=BOND 
    size=248 
    extPortId=0x21f01 
    portName=kk 
    phyStatus=1 
    linkStatus=10 
    linkQuality=0 
    tmpFlag=0 
    shutdown=0 
    portType=7 
    logicType=0 
    protocolType=0 
    node=0 
    maxSpeed=0 
    runSpeed=0 
    drvName= 
    uptime=17406144 
    ------------Show port end---------- 
    admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

type name

Port type name.

size

Port memory size.

extPortId

Port ID.

portName

Port name.

phyStatus

Physical status of the port.

tmpFlag

Temporary flag of the port.

linkStatus

Link status of the port.

linkQuality

Link quality of the port.

shutdown

Status of the port switch.

portType

Port type.

logicType

Logical type of the port.

protocolType

Port protocol type.

node

Node where the port is located.

maxSpeed

Type of the maximum running rate of the port.

runSpeed

Type of the port running rate.

drvName

Name of the port driver.

uptime

Time when the link quality status of the port is updated.

bondId

ID of the bond port to which the port belongs.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 633142

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next