No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrm showcounter

mrm showcounter

Function

The mrm showcounter command is used to view the count of requests processed by the metadata reliability module. If an incorrect request exists, this command can be used to locate it.

Format

mrm showcounter

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View the count of requests that are processed successfully.

admin:/diagnose>mrm showcounter 
  Counter Type Step Name                                   Received               Return Ok              Return Bad             Not Return            
  --------------  ------------------------------------------  ---------------------  ---------------------  ---------------------  --------------------- 
  LogZoneAction Read Log according key                                         52                     52                      0                      0 
  LogZoneAction Batch read Log according key                                   36                     36                      0                      0 
  LogZoneAction Modify Log according key                                       14                     14                      0                      0 
  LogZoneAction Free Log according key                                          3                      3                      0                      0 
  LogZoneAction Check pool repair file                                          0                      0                      0                      0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Counter Type

Request type.

Step Name

Request name.

Received

Count of received requests.

Return Ok

Count of requests that are correctly returned.

Return Bad

Count of requests that fail to be returned.

Not Return

Count of requests that are not returned.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 637150

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next