No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The uboot1_up command is used to update the U-Boot.






serial port mode

Usage Guidelines



Update the U-Boot.

Hi1710_UBOOT> uboot1_up 
tftp server IP: 
BMC board  IP: 
file name:u-boot.bin 
TFTP from server; our IP address is 
Filename 'u-boot.bin'. 
Load address: 0x8b000000 
Loading: *2 len bad 158 < 335 
Bytes transferred = 215792 (34af0 hex) 
Un-Protect Flash Bank # 1 
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the PCB cannot work normally. 

erase flash from :40100000 to :4017ffff,please wait a while 

.... done 
Erased 4 sectors 
Copy u-boot to flash,please wait a while 
 9....8....7....6....5....4....3....2....1....erase flash from :401e0000 to :401fffff,please wait a while 

. done 
Erased 1 sectors 
Protect Flash Sectors 0-15 in Bank # 1 

Success to load u-boot1.please update uboot0 and uboot1 in a uboot update process.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632164

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next