No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cfgfs_up

cfgfs_up

Function

The cfgfs_up command is used to upgrade the cfg file system.

Format

cfgfs_up

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Upgrade the cfg file system.

Hi1710_UBOOT> cfgfs_up cfgfs.cramfs                                                                                                  
tftp server IP:192.168.0.2                                                                                                        
BMC board  IP:192.168.0.1                                                                                                         
file name:cfgfs.cramfs                                                                                                               
TFTP from server 192.168.0.2; our IP address is 192.168.0.1                                                                    
Filename 'cfgfs.cramfs'.                                                                                                             
Load address: 0x8b000000                                                                                                             
Loading: #################################################################                                                           
         #################################################################                                                           
         ########################################                                                                                    
done                                                                                                                                 
Bytes transferred = 2486272 (25f000 hex)                                                                                             
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the  
PCB cannot work normally.                                                                                                            
erase flash from :42c00000 to :431fffff,please wait a while                                                                          

................................................ done                                                                                
Erased 48 sectors                                                                                                                    
Copy cfg file system to flash,please wait a while                                                                                    
 9....8....7....6....5....4....3....2....1....                                                                                    
erase flash from :45c00000 to :461fffff,please wait a while                                                                          

................................................ done                                                                                
Erased 48 sectors                                                                                                                    
Copy cfg file system to flash,please wait a while                                                                                    
 9....8....7....6....5....4....3....2....1....                                                                                       
Success to load cfg file system.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636903

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next