No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Parts Replacement

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Safety Precautions for Operating Equipment

Safety Precautions for Operating Equipment

When installing and maintaining devices, follow the electrical safety precautions to prevent personal injury and equipment damage.

Power-on and Power-off

  • Before checking device installation and cable connections, ensure that the system power supply is switched off. Otherwise, incorrect or loose cable connections may result in personal injury or equipment damage.
  • Do not wear an ESD wrist strap when powering on the equipment to prevent an electric shock.
  • Do not remove or insert cables and field replaceable units (FRUs) during a system startup. Otherwise, data loss may occur.
  • After you switch off the power supply, wait at least one minute before switching it back on.
  • To avoid disk damage and data loss, do not switch the power supply off while any disk running indicators are still blinking.


  • Do not touch the connectors of power cables or communication cables. Otherwise, an electric shock may occur.
  • Do not touch devices with bare hands in electrostatic sensitive areas. Wear an ESD wrist strap, ESD gloves, or ESD clothing to prevent personal injury and equipment damage.

When you perform troubleshooting, follow these precautions:

  • Do not perform troubleshooting during a thunderstorm.
  • Ensure that power cables are intact and the grounding measures are safe and effective.
  • Keep the troubleshooting area clean and dry.
Updated: 2019-07-11

Document ID: EDOC1000181634

Views: 46208

Downloads: 185

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next