About This Document
Purpose
This document describes how to replace parts of OceanStor V5 series and provides instructions on safety operations, preparations, and precautions.
The following table lists the product models that this document is applicable to.
Product Series |
Product Model |
---|---|
OceanStor 5000 V5 series |
OceanStor 5110 V5a, 5300 V5, 5500 V5, 5600 V5, and 5800 V5 |
OceanStor 6000 V5 series |
OceanStor 6800 V5 |
OceanStor 5000F V5 series |
OceanStor 5110F V5a, 5300F V5, 5500F V5, 5600F V5, and 5800F V5 |
OceanStor 6000F V5 series |
OceanStor 6800F V5 |
a: Applicable to V500R007C30 and V500R007C60. |
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 17 (2021-01-30)
This is the seventeenth release.
Optimized some description.
Issue 16 (2020-09-15)
This is the sixteenth release.
Optimized some description.
Issue 15 (2019-12-30)
This issue is the fifteenth official release.
Added chapter "Before You Start".
Issue 14 (2019-09-30)
This is the fourteenth release.
Modified the document name and applicable product models.
Optimized some description.
Issue 13 (2019-08-20)
This is the thirteenth release.
Added supported quorum server models.
Updated CRUs and FRUs.
Issue 12 (2019-06-30)
This is the twelfth release.
Added section How to Access Parts Replacement Multimedia
Optimized some description.
Issue 11 (2019-05-15)
This issue is the eleventh official release.
Added OceanStor 5110F V5 to product models.
Issue 10 (2019-03-30)
This issue is the tenth official release.
Added OceanStor 5110 V5 to product models.
Issue 09 (2019-01-25)
This issue is the ninth official release.
Updated the parts of a quorum server that can be replaced and the procedure for replacing those parts.
Issue 08 (2018-12-06)
This issue is the eighth official release.
Optimized the document structure based on the replacement methods of CRUs and FRUs.
Updated operations related to SmartKit.
Issue 07 (2018-07-30)
This issue is the seventh official release.
Optimized some descriptions.
Issue 06 (2018-05-09)
This issue is the sixth official release.
Updated SmartKit operations in section Replacing an FRU.
Issue 05 (2018-01-30)
This issue is the fifth official release.
Modified the applicable product versions in the replacing quorum server procedure.
Issue 04 (2017-11-30)
This issue is the fourth official release.
Optimized some descriptions.
Issue 03 (2017-08-30)
This issue is the third official release.
Rectified some descriptions of replacing a controller.
Issue 02 (2017-06-01)
This issue is the second official release.
Added the procedure for removing/inserting the power cables.
Issue 01 (2017-02-28)
This issue is the first official release.