No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Parts Replacement

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing a PDU (for 18000 V5/18000F V5 Series)

Replacing a PDU (for 18000 V5/18000F V5 Series)

This section describes how to replace a power distribution unit (PDU).

Impact on the System

Replacing a PDU may affect normal power supply. Replace the PDU in off-peak hours and back up data in advance to avoid unexpected service interruption.

Prerequisites

  • The spare part of the PDU is ready.
  • The PDU that you want to replace has been located.

Precautions

Remove and insert the PDU with even force. Excessive force may damage the appearance or connectors of the PDU.

Tools and Materials

  • ESD bag
  • Label
  • Phillips screwdriver
  • Ladder

Procedure

  1. Open the rear cabinet door.
  2. Remove the PDU to be replaced.

    1. Record the position information about the device cables on the PDU to be replaced.
      NOTE:

      Record the position information on the labels of the device cables.

    2. Remove device cables from the PDU.
    3. Unplug the PDU's connector that connects to the power supply in the equipment room.
    4. Remove the PDU ground cable from the ground screw hole of the cabinet.
    5. Use a Phillips screwdriver to remove M6 screws on the PDU. Lift the PDU and separate PDU from the cucurbit hole. Remove the PDU.

  3. Install the PDU.

    1. Take the replacement cable out of the package box.
    2. Fit the tabs on the PDU rear panel into the keyhole mounting and push them downwards to lock the PDU.
    3. Use M6 screws to fix the PDU.
    4. Fasten the ground cable of the PDU to the ground screw hole of the cabinet using ground screws.
    5. Plug the PDU's connector that connects to the power supply in the equipment room.
    6. Refer to the records in Step 2.1 and reconnect the device cables to the PDU.

  4. Verify that the PDU is properly installed and firmly secured.
  5. Power on the PDU.

    NOTE:

    For details about how to power on the PDU, see the Installation Guide.

Follow-up Procedure

After the PDU is replaced, label it for subsequent operations.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181634

Views: 46615

Downloads: 185

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next