No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring the APS servers

Restoring the APS servers

Scenarios

Forcibly restore a linked clone or full memory APS server to its initial state, which does not affect data disks of the APS server.

NOTE:
  • After an APS server is restored, only data stored on data disks will be remained. Data on the system disk such as that on the desktop and in Favorites will be lost. If you want to keep such data, back up it in advance.
  • You can restore the APS servers that meet the following conditions:
    • The running status is Running or Stopped.
    • The assignment status is Assigned.
    • The login status is not In use.

Impact on the System

VMs are restored to the status of being provisioned from the template when you clear junk data (like user data) by restoring APS servers.

Prerequisites

  • You can open the Desktop page using the browser.
  • VMs in a VM group have been assigned to users.

Data

Data preparation is not required for this operation.

Procedure

Select the method to restore the system.

  1. Select one of the following methods to restore the APS servers:

    • To restore an APS server, go to Step 2.
    • To restore the APS servers in a VM group, go to Step 7.

Restore an APS server.

  1. On the FusionAccess Portal, choose Desktop > All Computers.
  2. Select the APS server whose system is to be restored from the query list, click Advanced Function, and select Restore System Disk from the drop-down list.

    The Set Restore Policy dialog box is displayed.

  3. Set the restore policy and notification message as prompted.

    • If the VM is in use or has important data to save later, select Next startup (Not now).
    • If the VM is not in use or has no important data to save, select Immediately (Forced restore).

  4. Click OK.

    The Warning dialog box is displayed.

  5. Click OK.

    The Succeeded dialog box is displayed.

  6. Click OK.

Restore the APS servers in a VM group.

  1. On the FusionAccess Portal, choose Desktop > VM Group.

    The page for managing VM groups is displayed.

  2. Select the VM group to be restored and click Restore System Disk.

    The Set Restore Policy dialog box is displayed.

  3. Set the restore policy and notification message as prompted.

    • If the VMs in the VM group are in use or have important data to save later, select Next startup (Not now).
    • If the VMs in the VM group are not in use or have no important data to save, select Immediately (Forced restore).

  4. Click OK.

    The Warning dialog box is displayed.

  5. Click OK.

    The Succeeded dialog box is displayed.

  6. Click OK.
Download
Updated: 2019-09-29

Document ID: EDOC1000182383

Views: 15294

Downloads: 125

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next