No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 08 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Browser for Accessing FusionAccess

Configuring a Browser for Accessing FusionAccess

Scenarios

Configure your browser to enable successful access to FusionAccess.

Prerequisites

The FusionAccess home page cannot be displayed properly.

Data

Data preparation is not required for this operation.

Procedure

Perform operations based on the browser type.

  1. Enter the FusionAccess address in the address box of your browser and press Enter.
  2. Determine the operations to be performed based on the browser type.

    • If Internet Explorer is used, go to Step 3.
    • If Mozilla Firefox is used, go to Step 16.
    • If Google Chrome is used, go to Step 28.
    NOTE:

    FusionAccess supports the following types of browsers:

    • Internet Explorer 8 to Internet Explorer 11
    • Firefox 32 to Firefox 45
    • Google Chrome 37 to Google Chrome 51

    If the browser you use is not supported by FusionAccess, buttons on the FusionAccess portal may not work properly and display errors may occur.

Configure Internet Explorer.

  1. Click Certificate Error on the address bar of Internet Explorer, and click View certificates in the displayed dialog box.

    The Certificate dialog box is displayed.

  2. Click Install Certificate.

    The Certificate Import Wizard dialog box is displayed.

  3. Click Next.

    The Certificate Store dialog box is displayed.

  4. Select Place all certificates in the following store and click Browse.

    The Select Certificate Store dialog box is displayed.

  5. Select Trusted Root Certification Authorities and click OK.

    The Certificate Store dialog box is displayed.

  6. Click Next.

    The Completing the Certificate Import Wizard dialog box is displayed.

  7. Click Finish.

    The Security Warning dialog box is displayed.

  8. Click Yes.

    The Certificate Import Wizard dialog box is displayed.

  9. Click OK.
  10. In the Certificate dialog box, click OK.
  11. On Internet Explorer, choose Tools > Internet Options.

    The Internet Options dialog box is displayed.

  12. Click the Advanced tab.
  13. In the Settings area, select Use TSL 1.1 and Use TSL 1.2, deselect Warn about certificate address mismatch and click OK.

    No further action is required.

Configure Mozilla Firefox.

  1. Check whether "This Connection is Untrusted" is displayed.

    • If yes, go to Step 17.
    • If no, no further action is required.

  2. Record the IP address and port number displayed, as shown in the red box in Figure A-6.

    Figure A-6 Page display

  3. Choose Tools > Options.

    The Options dialog box is displayed.

  4. Click Advanced and select Encryption.
  5. Click View Certificates.

    The Certificate Manager dialog box is displayed.

  6. Click the Servers tab.
  7. Expand the certificate whose name is huawei, select ssoserver, and click Add Exception.

    The Add Security Exception dialog box is displayed.

  8. In the address box, enter https://IP address recorded in Step 17:Port number recorded in Step 17, for example, https://192.168.111.58:8448.
  9. Click Get Certificate.
  10. Click Confirm Security Exception.

    The Add Security Exception dialog box is closed.

  11. Click OK.

    The Certificate Manager dialog box is closed.

  12. Click OK.

    The Options dialog box is closed, and the browser page is displayed.

Configure Google Chrome.

  1. Check whether "The page cannot be displayed" is displayed.

    • If yes, go to Step 29.
    • If no, no further action is required.

  2. Copy the URL on the page.
  3. Open a new page on the browser, paste the URL to the address box, and press Enter.
  4. Click Continue Anyway.

    The FusionAccess home page is displayed.

  5. Close the page opened in Step 30.

    Refresh the FusionAccess home page, the FusionAccess home page is displayed.

Download
Updated: 2019-04-25

Document ID: EDOC1000182383

Views: 13097

Downloads: 54

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next