No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 08 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Client Self-Service Management (Android TC)

Client Self-Service Management (Android TC)

Scenarios

This section describes how to log in to the HDP client using an Android TC and deregister applications.

Prerequisites

  • FusionAccess is running properly.
  • The HDP client has been installed locally.
  • The shared desktop and application have been provisioned and the account and password for logging in to the system have been assigned.
NOTE:

If the HDP client has not been installed locally, log in to the WI page and install the HDP client as prompted.

Data

Key data and parameters required for this task are described in the specific procedures.

Procedure

Log in to the HDP client.

  1. Log in to the TC, click , and choose HDPShareAppTray.

    The User Login window is displayed.

  2. Enter required information, as shown in Figure 5-11.

    NOTE:

    If Remember Password is selected, you can log in to the HDP client through the created shortcut without inputting the password.

    Figure 5-11 User login
    • Server Address: Enter fully qualified domain name (FQDN) or service plane IP address of the WI server. If FQDN is used, configure the IP address of the DNS server first.
    • Username: Enter the account for logging in to the system.
    • Password: Enter the password for logging in to the system.
    • Domain: Enter correct domain information in multi-domain scenarios, for example, vdesktop.huawei.com.

  3. Click login to log in to the HDP client.

    The SessionLogoutDialog window is displayed, as shown in Figure 5-12.
    Figure 5-12 SessionLogoutDialog

Perform self-service management.

  1. In the session list on the left, select the session that you want to deregister based on actual requirements.

    • session: Share Desktop indicates the session of the shared desktop.
    • session: Remote App indicates the session of the remote application.

  2. Click Logout.

    A dialog box stating "The remote server is logging out of the session, please wait..." is prompted. Wait until the session is deregistered.

    NOTE:
    • The shared desktop occupies one session, and other applications are collected in session: Remote App session.
    • When session: Remote App is deregistered, all applications in the session are deregistered at the same time.

Download
Updated: 2019-04-25

Document ID: EDOC1000182383

Views: 13166

Downloads: 56

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next