No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 08 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Bare VM

Creating a Bare VM

Scenarios

Create a bare VM first before creating a VM template. You need to determine VM basic parameters, such as the operating system (OS) type and version, hardware specifications (including CPUs, memory capacity, and the number of disks and NICs), the port group that NICs belong to, the data storage type of disks, configuration mode, and capacity. After determining the basic parameters, create a bare VM on FusionCompute.

This document uses V100R006C00U1 as an example to describe operations concerning the FusionCompute management page. The operations may vary depending on the version.

Prerequisites

  • The computing, storage, and network resources required for creating VMs are available.
  • You have logged in to FusionCompute.

Data

For details about key data and parameters, see the description given in specific procedures.

Procedure

Create a bare VM.

  1. On the FusionCompute portal, choose VM and Template > Getting Started. Click Create VM.

    The Create VM page is displayed.

  2. Select Create VM, click Next, and set related parameters, as shown in Table 2-4.

    NOTE:

    You are advised to use the high-performance storage instead of the low-performance storage, such as NL-SAS and SATA.

    Table 2-4 Parameter settings

    Category

    Description

    VM Name

    Name: Identifies an RD Licensing server, for example, RDS_License.

    Computing Resource

    Specifies the location where the VM is to be created. The default value ManagementCluster is recommended.

    OS

    • OS: Select Windows.
    • OS Version: Windows Server 2012 R2 Standard 64bit is recommended.

    VM Hardware Specification

    Hardware:

    • CPU: Configure two CPUs.
    • Memory: Configure 2 GB memory.

      Set Reserved(MB) to Maximum.

    • NICs1: Set Port group to the service plane network of FusionAccess infrastructure VMs.
    • Disks1: Set Configuration mode to Common and Capacity(GB) to 50.

    Others

    HA: Deselect Enable.

  3. Retain default values for other parameters and create a bare VM as prompted.
Download
Updated: 2019-04-25

Document ID: EDOC1000182383

Views: 13151

Downloads: 56

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next