No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using Applications on TCs

Using Applications on TCs

Scenarios

After the application virtualization feature is deployed on the system, you can access applications or shared desktops from the web interface (WI) after logging in to the system using a thin client (TC).

NOTE:

Select a browser based on actual requirements.

  • The Mozilla Firefox browsers that can be used to log in to the WI are Mozilla Firefox 14 to 51.
  • The Safari browser on a TC cannot be used to log in to the WI.

Prerequisites

  • Applications have been published.
  • You have obtained the username and password for logging in to the WI.

Data

None

Procedure

Set TC login parameters.

  1. Start the TC.
  2. On the TC where the AccessClient software has been installed, choose Start > All Programs > AccessClient > CloudClient.

    The Edit Server Information page is displayed.

  3. Enter information in Server Name and Server Address, and click OK.

    NOTE:

    If there are multiple WI IP addresses, set the common WI IP address as the default IP address.

    • Server Name: specifies name of the WI server. For example, WI01.
    • Server Address: specifies IP or URL address on the service plane of the WI server. For example, 192.168.161.61.

Log in to the WI.

  1. Enter the correct username and password, and press Enter.
  2. is displayed on the WI.

Access applications.

  1. Click Common APP or All APP.
  2. Click the required application to run the application remotely.

Access shared desktops.

  1. Click Common APP or All APP.
  2. Click Windows Desktop to access the shared desktop.
Download
Updated: 2019-09-29

Document ID: EDOC1000182383

Views: 15606

Downloads: 133

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next