No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 08 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting an APS Server

Restarting an APS Server

Scenarios

Restart an APS server, and clear temporary data and cache to ensure the stability of the APS server.

Impact on the System

All services are interrupted during the APS server restart and recover after the restart is successful.

Prerequisites

The username and password for logging in to FusionAccess have been obtained.

Data

Data preparation is not required for this operation.

Procedure

  1. Select the restart mode as required.

    NOTE:

    The temporary data and cache on the APS server will be cleared after the restart.

    • To perform manual restart, go to Step 2.
    • To perform periodical automatic restart, go to Step 9.

Manually Restarting the APS Server

  1. On the FusionAccess portal, choose Desktop > VM Group.

    The page for managing VM groups is displayed.

  2. Select the VM group to which the APS server belongs, select the APS server to be restarted, click Advanced Function above the VM list, and select Set maintenance mode.
  3. Select Open Maintenance Mode and click OK.
  4. After the APS server enters the maintenance mode, click Restart above the list to restart the APS server.
  5. After the APS server is restarted, click Advanced Function above the VM list and select Set maintenance mode.
  6. Select Shutdown Maintenance Mode and click OK.
  7. Check whether there is any related alarm. If yes, handle the alarm according to the alarm help.

    The task is completed.

Periodically Restarting the APS Server

  1. Log in to FusionAccess.
  2. Choose Task > Scheduled Task and click Restart VM.

    The Restart VM window is displayed.

  3. Set the key parameters based on the actual situation, as shown in Figure 4-1.

    NOTE:

    It is recommended that the restart interval is one week.

    Figure 4-1 Basic Information Settings

  4. Click Next and select the option for restarting the APS server by scheduled task.
  5. Click OK.

    The task is completed.

Download
Updated: 2019-04-25

Document ID: EDOC1000182383

Views: 14535

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next