No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring APS Server Resource Monitoring

Configuring APS Server Resource Monitoring


On the FusionCompute portal, customize monitoring policies for an APS server.

Impact on the System

This operation has no adverse impact on the system.


You have logged in to FusionCompute.


Data preparation is not required for this operation.


  1. On the FusionCompute portal, choose Monitoring > Performance > Custom Monitoring.
  2. Select a monitoring customization type based on the actual situation:

    • Single Object with Multiple KPIs: allows users to view multiple indicators of a single object.
    • Single KPI for multiple objects: allows users to view an indicator of multiple objects.

      Single Object with Multiple KPIs is used as an example.

  3. In the navigation tree of the Single Object with Multiple KPIs page, choose VM and click .
  4. On the Add Object page, select all the APS servers for which the monitoring policies are to be configured and click Save.
  5. Select an added APS server and click Select KPI. On the displayed page, add indicators, as shown in Figure 4-2.

    Figure 4-2 Select KPI

  6. Click Save.

    The monitoring indicators are displayed on the right of the APS server.

  7. Repeat Step 3 to Step 6 to configure the monitoring policies for other APS servers.
Updated: 2019-09-29

Document ID: EDOC1000182383

Views: 15540

Downloads: 133

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next