No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an APS Server Template(Full Copy)

Creating an APS Server Template(Full Copy)


Configure the APS VM as required and create an APS server template.


This section uses the Windows Server 2012 R2 OS as an example.


  • You have obtained the template tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso.
  • If mobile clients need to access remote applications or shared desktops, the default input method of the APS server must be set to English.


For details about key data and parameters, see the description given in specific procedures.


Use the template tool to configure the VM OS.

  1. Mount the template tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso to the VM.
  2. On the VM, double-click the CD-ROM.


    On some VM, after you double-click the CD-ROM, the FusionAccess Windows Installer window is displayed.

  3. Double-click run.bat.

    The window is displayed, as shown in Figure 2-13.

    Figure 2-13 FusionAccess Windows Installer

  4. Click Create Template.

    The window for creating a template is displayed.

  5. Perform operations as prompted. When the page shown in Figure 2-14 is displayed, go to Step 6.

    • On the Core Component page, select SBC.
    • During the operation, if you are prompted to restart the VM, use the Administrator account to login to the VM after the VM is restarted.
    • If an exception occurs during the restart (restart fails), manually start the VM, mount the template tool ISO file again, and go to the template tool directory to reinstall the template tool.
    • If Configure user login is not selected during template creation, users in the Users group cannot log in to the APS VM locally but can use remote applications or shared desktops for login.
    • The assigned user or user group when the administrator publishes applications is a common user or user group. In this case, when updating or adding applications, you need to log in to the APS VM using an account with the administrator permission. If you do not have an account with the administrator permission, select Create local administrator account on the Function page to create an account. If you use the HDA installation package to configure the APS VM, manually add the account to the Administrators group of the APS VM.
    • The default system accounts, such as Authenticated Users, in the Users group and Remote Desktop Users group cannot be deleted.
    Figure 2-14 Finish page

Install application software.

  1. Install application software on the VM.

    • Some security software (antivirus software, safeguards, and firewalls) may conflict with the Microsoft encapsulation tool and cause VM creation failure, the blue screen of death (BSOD), or a blank screen for created VMs. Therefore, install security software only after VMs are successfully provisioned.
    • You are advised to install the application software in a public directory (expect C:\users\user) of the OS instead of a customized directory; otherwise, users cannot access the applications.
    The installation method varies with the format of the application software to be installed:
    • If the application software is an .iso file, mount the CD-ROM drive to the VM and run the installation program.
    • If the application software is not an .iso file, find the application software in C:\ on the VM and run the installation program.
    • After the installation is complete, unmount the CD-ROM drive from the VM. Otherwise, the CD-ROM drive cannot be mounted to another VM that runs on the same host.
    • To avoid affecting VM connections, disable any firewall in antivirus software or enable the ports required by the HDP on the firewall before installing the application software. For details about the ports required by the HDP, see Description > Communication Matrix in FusionAccess Desktop Solution V100R006C20 Product Documentation.
    • After installing the application software, you are advised to clone the VM. If the VM data storage type is not virtual storage, power off the VM and clone it:

      In the row of the VM to be cloned, choose More > Clone VM and click Next as prompted. Then click Finish to perform the VM cloning operation.

      The VM cloning progress is displayed on the task center. Ensure that the cloned VM is in stopped status.

      If this operation is not performed, you need to create a bare VM again and install and configure the VM OS when template encapsulation fails. To reduce repeated operations, you are advised to clone the VM.

      Cloning a VM takes about 20 minutes. You are advised to perform this operation during off-peak hours.

Enable the remote desktop connection service.

  1. In the VNC window for the VM, right-click in the lower left corner of the window, enter sysdm.cpl in the Run text box, and press Enter.

    The System Properties window is displayed.

  2. On the Remote tab page, select Allow remote connections to this computer, and click OK, as shown in Figure 2-15.

    Figure 2-15 Enabling remote desktop connection

(Optional) Deleting local users


A local user of the Windows system can log in to each Windows VM created by the image. For security reasons, you are advised to delete unnecessary local users in the Windows system as needed.

  1. Delete unnecessary local users in the Windows system as needed. For details, see Deleting Local Users of Windows System.

Encapsulate the VM template.

  1. In the FusionAccess Windows Installer window, click Sysprep, as shown in Figure 2-16.

    Before using Sysprep, confirm that the IP address and the DNS server address can be automatically obtained.

    Figure 2-16 Encapsulating the VM template

  2. After the template is encapsulated, click Finish.
  3. Unmount the file.
  4. Shut down the VM.

Convert the VM into a template.

  1. On the FusionCompute portal, choose VM and Template > VM.
  2. In the row that contains the VM to be converted, choose More > Convert to Template.

    A dialog box is displayed.

  3. Click OK.

    A dialog box is displayed.

  4. Click OK.

Configure the template.

  1. On the FusionAccess portal, click Desktop.
  2. In the navigation tree, choose Service Configuration > VM Template.
  3. In the right pane, locate the row that contains the VM template to be provisioned, and set parameters based on application scenarios.

    • Service type: Select SBC.
    • Type: Select Full Copy Template.

  4. Click OK.
  5. Click Confirm in the displayed dialog box.

    A message stating Template Configuration saved successfully is displayed.

  6. Click Back and check the template type.

    The template creation task is complete.

Updated: 2019-09-29

Document ID: EDOC1000182383

Views: 15442

Downloads: 132

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next