No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using Applications on an iOS Device

Using Applications on an iOS Device


After the application virtualization feature is deployed on the system side, you can access and use applications or shared desktops from the web interface (WI) after logging in to the system using an iOS mobile device.

This task only supports mobile devices that run iOS 8.0 to 12.3.


The data and specific procedure of the initial configuration can be customized based on the actual situation.


Set iOS login parameters.

  1. Search fusionaccess in the App Store.
  2. Download and install the fusionaccess application software.
  3. Tap the fusionaccess application to go to the login screen, and tap .

    The Accounts screen is displayed.

  4. Tap in the upper right corner.

    The New Account screen is displayed.

  5. Enter the cloud server address in Address and tap Next.
  6. Set the description information, username, password, and domain name, and tap Save, as shown in Figure 5-1.


    In multi-domain scenarios, enter the correct domain information to ensure successful login, for example,

    Figure 5-1 New Account

    The cloud server address is the fully qualified domain name (FQDN) or the service plane IP address of the WI server. If the FQDN is used, configure the DNS server address first.

Log in to the WI.

  1. Return to the login screen, and tap the account.

    The Favorite screen is displayed, as shown in Figure 5-2.

    Figure 5-2 Favorite

Use an application.

  1. Tap Favorite or Apps to go to the related screen.
  2. Tap the required application to run and use the application.

Use a shared desktop.

  1. Go to the Apps screen and tap .
  2. Go to the Favorite screen and tap Windows Desktop in the Favorite list.

    The shared desktop can be used.

Updated: 2019-09-29

Document ID: EDOC1000182383

Views: 15313

Downloads: 127

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next