No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Application Virtualization User Guide 08 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Application Users

Adding Application Users

Scenarios

When a new user or user group applies for applications, authorize the new user or user group to use applications by adding the user or user group.

Prerequisites

  • Applications have been published.

Data

Table 3-8 lists the data to be obtained.

Table 3-8 Data to be obtained

Category

Parameter

Description

Example Value

Application authorization parameters

Domain name

Specifies the domain to which the user or user group to be added belongs.

vdesktop.huawei.com

User(Group) name

  • Identifies an application name. The name can contain Chinese characters, digits, letters, spaces, and special characters: ~!@%^_+-, and cannot exceed 55 characters. The name cannot start with any of the following characters: !@%^.
NOTE:

The application name cannot consist of only digits. You are advised to set the application name to a combination of digits and letters.

  • An existing user or user group name cannot be reused.

User01

Procedure

  1. On the FusionAccess portal, choose Desktop.
  2. In the navigation tree, click the application group to be authorized under Application Group.
  3. In the application list, select one or multiple applications to be authorized and click Add Authorization.

    The Add User page is displayed.

  4. Set the following parameters based on the data plan, and click Add.

    • Domain name
    • User(Group) name

  5. Click Save.

    The system displays a message indicating that the user or user group is added successfully.

Download
Updated: 2019-04-25

Document ID: EDOC1000182383

Views: 13695

Downloads: 76

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next