No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess Desktop Solution V100R006C20 End User Guide 08

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to VM Using a Windows PC (Client Mode)

Logging In to VM Using a Windows PC (Client Mode)

Installing the cloud client in the Windows PC has the following restrictions:

  • The user logging in to the Windows PC has the administrator rights.
  • PCs support Windows 7, Windows 8.1, and Windows 10.
  • The available disk space on drive C of the Windows PC is more than 500 MB. Memory must not be less than 2 GB and CPU frequency must not be less than 2.0 GHz.
  • When the security software displays a prompt, perform the installation operation as prompted.

Updated: 2019-04-25

Document ID: EDOC1000182385

Views: 7440

Downloads: 67

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next