No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Provisioning VMs in Import Mode

Provisioning VMs in Import Mode

Scenarios

Provisioning VMs in import mode includes the following scenarios. This section uses scenario 1 as an example.

  1. Import VMs that are created on FusionManager or FusionCompute but are not assigned to FusionAccess for unified management. VMs to be provisioned in import mode can only be VMs that are not in use and are not managed by other environments.
  2. Deploy VMs on FusionManager or FusionCompute in template creation mode and import the VMs to FusionAccess for unified management.

    Deploy VMs using a template according to the operations in Creating VM Templates, and find, import, and assign VMs on FusionAccess according to the content in this section.

NOTE:

Before using the template tool to configure a template VM, set Location of the Huawei desktop controller (HDC) to Manual, and enter the HDC address.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

  • VMs have been created on FusionManager, or FusionCompute.
  • You have logged in to the FusionAccess portal. For details, see Logging In to FusionAccess.
  • You have configured the browser. The Desktop page can be properly displayed.
  • You have obtained the template tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso.

Data

For details about the parameters required for this task, see Parameters for Adding VMs.

Procedure

Use the template tool to configure the VM OS.

  1. Log in to the VM as user Administrator.
  2. Mount the template tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso to the VM.
  3. On the VM, double-click the CD-ROM.
  4. Double-click run.bat.

    The FusionAccess Windows Installer window is displayed.

  5. Click Make desktop agent.

    On the Make desktop agent window, configure the HDA as prompted.

Discover VMs.

  1. On the FusionAccess portal, choose Desktop > All Computers > Unmanaged Computer.
  2. Click Manage Discovery Task.

    The Manage Discovery Task page is displayed.

  3. Select Desktop.

    NOTE:

    The Desktop is the HDC server configured in System > Initial Configuration > Desktop Components.

  4. Click Start.

    A confirmation dialog box is displayed.

  5. Click Confirm.

    A confirmation dialog box is displayed.

  6. Click Confirm.

    The VM discovery task starts.

    NOTE:

    The discovery task automatically stops when the preset end time reaches, or you can manually stop the task.

Import VMs.

  1. On the FusionAccess portal, choose Desktop > VM Group.

    The page for managing VM groups is displayed.

  2. Set VM group type to Full Copy, and click Import VM.

    NOTE:

    If there is no corresponding VM group in the list, click Create VM Group, enter related information, and click Finish.

    • Service Type: VDI
    • VM group name: Set this parameter based on the actual plan.
    • VM group description: Set this parameter based on the actual plan.
    • VM group type: Full copy

  3. In VM list, click Add to add VMs to be imported.
  4. Click OK.
  5. Click Finish.
  6. In the displayed dialog box, click Confirm.
  7. Click Return to VM Group.

Assign VMs.

  1. On the FusionAccess portal, choose Desktop > Desktop Group.

    The page for managing desktop groups is displayed.

  2. On the desktop group management page, select the target desktop group in the list, and click Assign VM.

    NOTE:

    If there is no corresponding desktop group in the list, click Create Desktop Group, enter related information, and click Finish.

    • Desktop: Desktop01
    • Desktop group name: Set this parameter based on the actual plan.
    • Desktop group type: Set this parameter based on the actual plan.
    • VM type: Full copy
    • Desktop group description: Set this parameter based on the actual plan.

    The Assign VM page is displayed.

  3. Configure basic information about the desktop group based on the data plan.

    NOTE:
    • If the assignment type is Multiple Users:
    • If user A has logged in to a VM, user B cannot log in to the VM.
    • If user A disconnects from a VM without logging out, user B can log in to the VM and user A will be forcibly logged out of the VM at that time.
    • In a pool desktop scenario, to ensure all users in user group A can log in to the pool desktop that is allocated to user group A, all the users must directly belong to user group A.

      For example, in a scenario where user a belongs to department A and department A belongs to department C, user a can directly log in to the pool desktop if the pool desktop is allocated to department A but cannot log in to the pool desktop if the pool desktop is allocated to department C.

  4. Click OK.

    The system displays a message indicating that the VM is assigned.

  5. Click Return to Desktop Group List.

    The page for managing desktop groups is displayed. You can view the information about the desktop group on the page.

    NOTE:

    When logging in to the VM for the first time, change the Administrator password immediately.

Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 20610

Downloads: 57

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next