No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing an OS on the Bare VM

Installing an OS on the Bare VM

Scenarios

On the FusionCompute portal, install an operating system (OS) and patches on the bare VM, configure the daylight saving time (DST), and initialize disks.

Windows 7, Windows 8.1, Windows 10, Windows Server 2008 R2, Windows Server 2012 R2 , and Windows Server 2016 VM OSs are supported in desktop cloud scenarios.

NOTE:

This section uses the Windows 7 Professional 32-bit OS as an example.

Prerequisites

  • You have obtained the ISO file for the OS to be installed.
    NOTE:

    Obtain the Windows ISO image file from official channels. Do not use an OS Ghost image that is manually simplified.

  • You have logged in to FusionCompute.

Data

For details about key data and parameters, see the description given in specific procedures.

Procedure

Mount a CD-ROM drive.

  1. According to the FusionSphere version. For details, see Table 3-11.

    NOTE:
    Table 3-11 Procedure for mounting a CD-ROM drive according to the FusionSphere version

    FusionSphere Version

    Procedure

    FusionSphere V100R005C10SPC700 or earlier

    1. On the row that contains the newly created bare VM, click Log In Using VNC.
    2. On the upper-layer of the VNC login window, click . On the menu that is displayed, click Mount Local CD/DVD-ROM Drive.
    3. Choose File > Browse. Select the ISO files that are stored in the local OS.
    4. Select Restart the VM now to install the OS.
    5. Click Confirm. The dialog box indicating that the CD-ROM drive is successfully mounted is displayed.
    6. Click OK.

    FusionSphere V100R005C10U1 or later

    1. On the menu bar in the upper pane of the FusionCompute page, click VM and Template.
    2. On the page that is displayed, click VM.
    3. On the Name column, click the bare VM that is newly created.
    4. Choose Hardware > CD/DVD-ROM drive > Mount Local CD/DVD-ROM Drive, and click OK.
    5. Mount the ISO files to a VM. Select Restart the VM now to install the OS, and click Confirm.
    6. In the VM and Template list, locate the row where the newly created bare VM is created, and click Log In Using VNC.

Install the OS.

  1. Install and configure the OS on the VM as required.

    For details, see Installing a Windows OS.

    NOTE:

    The temporary account must be set to LocalAccount when you install the OS. Otherwise, the template tool cannot delete the temporary account automatically, which poses a security risk.

    If you need to manually delete local users, refer to Deleting Local Users of Windows System.

  2. Unmount the OS ISO file.
Activate the Administrator account for the VM.
NOTE:

Ignore this operation on Windows Server 2008 R2, Windows Server 2012 R2, and Windows Server 2016 .

  1. On the VM, click and enter compmgmt.msc to go to the Computer Management window.
  2. Choose Computer Management(Local) > System Tools > Local Users and Groups and select Users.
  3. In the right pane, right-click Administrator and choose Properties.

    The Administrator Properties window is displayed.

  4. On the General tab page, deselect Account is disabled and click OK.

    The Administrator account is activated, and its default password is empty.

    Set the password for the Administrator account. If the password is left blank, this task will fail.

  5. Right-click Administrator and choose Set Password.

    The password must conform to the following rules:
    • Contain at least one uppercase letter (A-Z), one lowercase letter (a-z), one digit (0-9), and one space character or special character (~!@#$%^&*()-_=+\|{};:'",<.>/?).
    • Contain 8 to 32 characters.
    • Cannot be same as the recent three passwords.
    • Cannot contain the username or the username in reversed order.

  6. Click Proceed.

    The Set Password for Administrator dialog box is displayed.

  7. Set the Administrator password as required, confirm the password, and click OK.

    The password is set.

  8. Click OK.
  9. Log out of the OS and log in to the VM using the Administrator account.
Configure the remote desktop service.
NOTE:

This operation ensures that the VM provisioned by using the template can be remotely accessed.

  1. On the VM, click and enter compmgmt.msc to go to the Computer Management window.
  2. Choose Computer Management(Local) > Services and Applications and select Services.
  3. In the list on the right, right-click Remote Desktop Services and choose Properties from the shortcut menu.

    The Remote Desktop Services Properties(Local Computer) window is displayed.

  4. On the General tab, set Startup type to Automatic and click OK.
Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 22056

Downloads: 59

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next