No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Updating a VM Template (Type 1)

Updating a VM Template (Type 1)

Scenarios

Modify the original VM template by installing additional software on the guest OS. You can only modify the following types of templates:

  • Full copy template
  • QuickPrep template
  • Linked clone or full memory template that has not been used to create VMs

If you use the template to create VMs, deselect Generate initial password on the Customize OS page.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

  • You have logged in to FusionCompute.
  • You have obtained the software packages to be installed.
  • You have obtained the template tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso.

Data

Data preparation is not required for this operation.

Procedure

Convert the template into a VM.

  1. On the FusionCompute portal, choose VM and Template > Template.
  2. Locate the row that contains the target VM, and choose More > Convert to VM to convert the template into a VM as prompted.

    VMs that are converted successfully will be displayed on the VM page.

  3. In the row that contains the VM, choose Power on, and power on the VM as prompted.

    NOTE:

    For a full copy template:

    • If the OS is a server version one, the administrator password is empty and needs to be reconfigured after the template is decapsulated.
    • If the OS is a non-server version one, the administrator password remains unchanged after the template is decapsulated.

Install application software.

  1. Locate the row that contains the VM, and choose VNC login.
  2. Check whether the software package is an .iso file.

  3. Mount ISO files to the VM.
  4. On the VM, double-click the CD-ROM.

    The CD-ROM window is displayed. You can see the software package in the window.

  5. Go to Step 14.
  6. On the VM desktop displayed in the VNC window, set the IP address of the PC or laptop used for installation to an IP address in the system management plane.
  7. Choose Start > Run.
  8. In Open, enter \\IP address of the PC or laptop\Letter of the drive that contains the software package$ and click OK.

    The Windows security dialog box is displayed.

  9. Enter the username and password of the PC or laptop and click OK.

    Go to the task manager of the PC or laptop.

  10. Copy the software installation packages to C:\ on the VM.
  11. Double-click each installation program and install the software as prompted.

    NOTE:

    After the software is installed, unmount the CD-ROM drive from the VM.

  12. The type of the original VM template cannot be changed.

    Decide whether a full copy template will be created.

Encapsulate a VM template.

  1. Repeat Step 6 to mount the template tool ISO file.
  2. In the CD-ROM window on the VM, double-click run.bat.

    The FusionAccess Windows Installer window is displayed.

  3. Perform operations as prompted to encapsulate the template.

    After the VM template is encapsulated, a message indicating that the encapsulation is performed successfully is displayed.

  4. Unmount the ISO file.

Convert the VM into a template.

  1. Convert the VM into a template. For details, see Converting a VM into a Template.
Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 21922

Downloads: 59

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next