No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a VM Using a Windows PC

Logging In to a VM Using a Windows PC


If domain authentication is used for user login, you can log in to your VM using a Windows PC. Login is successful only when domain authentication is successful.

  • You are advised to use the CloudClient to log in to the desktop.
  • The initial configuration described in this section needs to be performed only once on each terminal device.
  • The data required for the initial configuration and specific configuration procedure can be customized based on the actual situation.


  1. Perform initial configuration.

    1. Configure the local IP address for the PC.
    2. Install the CloudClient.

      Installing the CloudClient in the Windows PC has the following restrictions:

      • The user logging in to the Windows PC has the administrator rights.
      • PCs support Windows 7, Windows 8.1, and Windows 10.
      • The available disk space on drive C of the Windows PC is more than 500 MB. Memory must not be less than 2 GB and CPU frequency must not be less than 2.0 GHz.
      • When the security software displays a prompt, perform the installation operation as prompted.
      1. On the browser of the PC, enter the cloud server address, for example,, and press Enter.
      2. On the login page, enter the user domain account and password.
      3. Click click here to download and install the CloudClient.
    3. Choose AccessClient > CloudClient from the Start menu.
    4. In the dialog box that is displayed, click Add.
    5. In the dialog box that is displayed, set Server Name and Server Address and click OK.

      The cloud server address is the fully qualified domain name (FQDN) or service plane IP address of the WI server. For FQDN, you need to configure the DNS server address.

    6. Click Quit.

  2. On the PC OS, double-click on the desktop to run the CloudClient.
  3. Enter the correct username and password, and press Enter.
  4. Click the VM icon to log in to the virtual desktop.
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 20233

Downloads: 57

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next