No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Parameters for Adding VMs

Parameters for Adding VMs

Table A-6 and Table2 Data required for adding linked clone VMs describe the data required for adding VMs.

Table A-6 Data required for adding full copy or QuickPrep VMs

Parameter

Description

Example Value

Site

Specifies the site to which the VMs belong. A site is a collection of computing, network, and storage resources.

site

Resource cluster

Specifies a cluster (in a site) that provides logical computing, network, and storage resources.

Cluster_01

Host

If you specify a host, the data store for the VM will be created on the host. If you specify a cluster, the data store for the VM will be randomly created on a host in the cluster.

CNA01

Select VM template

This parameter is automatically associated with VM group type. If VM group type is Full copy, Select VM template can be Full copy or QuickPrep. The template name indicates the type of the template:

  • fullcopy_template: indicates a full copy template.
  • quickprep_template: indicates a QuickPrep template.

-

VM Specifications

CPU

The number of CPUs ranges from 1 to 64. You are advised to configure 2 to 64 CPUs if the OS is Windows 8.1 (32-bit/64-bit) or Windows Server 2012 R2 and configure 4 to 64 CPUs if the OS is Windows 10 (32-bit/64-bit) or Windows Server 2016.

2

Memory

The memory capacity (in MB) ranges from 1024 to 1024000. You are advised to configure 2048 MB to 1024000 MB memory if the OS is Windows 8.1 (32-bit/64-bit) or Windows Server 2012 R2 and configure 4096 MB to 1024000 MB if the OS is Windows 10 (32-bit/64-bit) or Windows Server 2016.

2048 MB

Disk configuration

  • The total number of disks cannot exceed 11.
  • The disk capacity (in GB) ranges from 1 to 65536.

Capacity: 20 GB

Mode: Common

NIC configuration

  • A maximum of 12 NICs can be configured.
  • Port group: You need to set the port group name, VLAN ID, maximum transmit bandwidth limit, and priority. If the maximum transmit bandwidth limit (in Mbit/s) is 0, there is no limit on the transmission bandwidth. If the priority is 0, no priority is set. The priority can be set from 1 to 7. A smaller value indicates a higher priority for service processing.
  • Obtain IP: specifies how IP addresses are allocated.
    • DHCP: You do not need to set the VM IP address when creating a VM. The VM IP addresses are automatically allocated by the DHCP server.
    • Static: The VM IP address is the IP address of the first NIC created when a VM is created.
  • Configure different port groups for the NICs on the same VM.

-

VM QoS Settings

Quota for the CPU

Specifies the CPU quota for a VM in resource contention. The quota indicates the relative priority or importance of a VM. For example, if the CPU quota of VM A is twice that of VM B, VM A can consume twice as many CPU resources as VM B. The CPU quota is calculated as follows:

  • Low: Number of CPUs x 500
  • Medium: Number of CPUs x 1000
  • High: Number of CPUs x 2000
  • Custom: 1 to 128000

Default value: Medium

Medium

Reserved for the CPU

Specifies the minimum computing capability of the VM. For example, if a VM has one CPU and Reserved (MHz) is set to 2000, the minimum computing capability of the VM is 2000 MHz.

  • Minimum value: 0
  • Maximum value: Number of CPUs x Host CPU frequency

Default value: 0

0

Limit for the CPU

Specifies the maximum computing capability of the VM. For example, if a VM has one CPU and Limit (MHz) is set to 2000, the maximum computing capability of the VM is 2000 MHz.

  • No limit
  • Limit
    • Minimum value: 1
    • Maximum value: Number of CPUs x Host CPU frequency

Default value: No limit

Not limited

Quota for the memory

Specifies the memory quota for a VM in resource contention. The quota indicates the relative priority or importance of a VM. For example, if the memory quota of VM A is twice that of VM B, VM A can consume twice as many memory resources as VM B. The memory quota is calculated as follows:

  • Low: Memory capacity x 5
  • Medium: Memory capacity x 10
  • High: Memory capacity x 20
  • Custom: 1 to 20971520

Default value: Medium

Medium

Reserved for the memory

Specifies the minimum physical memory resources of the VM. If the reserved memory is 0, the system reserves the minimum required memory resources for the VM.

Value:

  • Minimum value: 0
  • Maximum value: configured memory size

Default value: 0

0

Number of VMs

Specifies the number of VMs to be created. The number of VMs is a positive integer less than or equal to 100. If the IP address of the first NIC is a static IP address (Obtain IP is set to Static in the NIC configuration), the value of Number of VMs ranges from 1 to the maximum number of VMs allowed in the IP segment. The maximum number of VMs cannot exceed 100. If the assigned IP addresses are already used in the network segment, the value of Number of VMs is the difference between the maximum number of VMs allowed in the IP segment and the number of used IP addresses. For example, if 80 VMs are allowed in a network segment and five IP addresses are used, the maximum number of VMs to be created is 75 (80 – 5).

100

Domain name

Enter the value of Domain configured on System > Initial Configuration > Domain/OU.

Domain_01

Local area

Enter the area configured on System > Rights Management > Area Management.

-

OU name

Enter the value of OU name configured on System > Initial Configuration > Domain/OU.

UserOU

VM name prefix

Specifies the VM name prefix before a VM is assigned. It is a string of 0 to 5 characters consisting of letters and digits.

AB

Table A-7 Data required for adding linked clone or full memory VMs

Parameter

Description

Example Value

Disk configuration

  • The number of disks is consistent with that of the existing VMs in the group.
  • The disk capacity is consistent with that of the existing VMs in the group.
  • Only disk data storage and configuration modes can be changed.

Mode: Common

NIC configuration

  • The NIC is consistent with that of the existing VMs in the group.
  • Only port group and IP address obtaining modes can be changed.
  • Port group: You need to set the port group name, VLAN ID, maximum transmit bandwidth limit, and priority. If the maximum transmit bandwidth limit (in Mbit/s) is 0, there is no limit on the transmission bandwidth. If the priority is 0, no priority is set. The priority can be set from 1 to 7. A smaller value indicates a higher priority for service processing.
  • Obtain IP: specifies how IP addresses are allocated.
    • DHCP: You do not need to set the VM IP address when creating a VM. The VM IP addresses are automatically allocated by the DHCP server.
    • Static: The VM IP address is the IP address of the first NIC created when a VM is created.
  • Configure different port groups for the NICs on the same VM.
NOTE:

Full memory VMs do not support static IP address assignment.

-

VM naming rule

The naming rule specifies how VMs are named. The VM name consists of a prefix and a number expressed by one or multiple number signs (#). The prefix starts with a letter or a digit. It consists of letters, digits, and -. The VM name is 1 to 15 characters long.

NOTE:

Names of linked clone and full memory VMs cannot contain the AD domain account name.

Fast#

Number of VMs

Specifies the number of VMs to be created. The number of VMs is a positive integer less than or equal to 100. If the IP address of the first NIC is a static IP address (Obtain IP is set to Static in the NIC configuration), the value of Number of VMs ranges from 1 to the maximum number of VMs allowed in the IP segment. The maximum number of VMs cannot exceed 100. If the assigned IP addresses are already used in the network segment, the value of Number of VMs is the difference between the maximum number of VMs allowed in the IP segment and the number of used IP addresses. For example, if 80 VMs are allowed in a network segment and five IP addresses are used, the maximum number of VMs to be created is 75 (80 – 5).

20

Local area

Enter the area configured on System > Rights Management > Area Management.

-

OU name

Enter the value of OU name configured on System > Initial Configuration > Domain/OU.

UserOU

Table A-8 describes the data required for assigning VMs.

Table A-8 Data to be obtained

Category

Parameter

Description

Example Value

If the desktop group type is Private

VM naming rule

The naming rule specifies how VMs are named. The VM name consists of a prefix and a number expressed by one or multiple number signs (#). The prefix starts with a letter or a digit. It consists of letters, digits, and -. The VM name is 1 to 15 characters long.

Fast#

Set assignment type

  • Multiple Users: Assign a VM to multiple users.
  • Single user: Assign a VM to one user.

Multiple Users

Select VM group

Select a full copy or hosting computer VM group for this parameter.

NOTE:

On FusionAccess, the full copy VM groups can be classified into full copy VM groups and QuickPrep VM groups.

ResourceGroup_01

Select Site

Select the site to which the VM belongs.

site

Add User (Group)

  • The added users must first be defined on the AD server. The username must be the same as the username set when the VM user is created.
  • Use commas (,) to separate multiple usernames, for example, vdesktop\User01, vdesktop\User02,….
  • You can enter usernames with or without domain names. A username can be in any of the following formats:
    • NetBIOS name\username, for example, vdesktop\User01
    • Fully qualified domain name (FQDN)\username, for example, vdesktop.huawei.com\User01
    • Username@NetBIOS name, for example, User01@vdesktop
    • Username@FQDN, for example, User01@vdesktop.huawei.com

User01

Setting User Group

If the user group Users is configured when the VM template is created, set this parameter to Users. Otherwise, set this parameter to Administrators.

If the OS you use is not in Chinese or English, set this parameter to the name of the administrator group in your language.

Administrator

If the desktop group type is Static pool or Dynamic pool

Select VM group

Select a VM group based on the clone type.

ResourceGroup_01

VM naming rule

The naming rule specifies how VMs are named. The VM name consists of a prefix and a number expressed by one or multiple number signs (#). The prefix starts with a letter or a digit. It consists of letters, digits, and -. The VM name is 1 to 15 characters long.

NOTE:

This parameter needs to be configured only when the VM group type is Full Copy.

Fast#

Select Site

Select the site to which the VM belongs.

NOTE:

This parameter needs to be configured only when the VM group type is Full Copy.

site

Number of VMs

Specifies the number of VMs assigned to a user. If this parameter is set to 0, Add User (Group) is unavailable.

2

Add User (Group)

  • The user (group) added must first be defined on the AD server. The username (group) must be the same as the value of Username or Group name set when the VM user is created.
  • Use commas (,) to separate multiple usernames, for example, vdesktop\UserGroup01, vdesktop\UserGroup02,….
  • You can enter usernames with or without domain names. A username containing a domain name can be in any of the following formats:
    • NetBIOS name\username, for example, vdesktop\UserGroup01
    • FQDN\username, for example, vdesktop.huawei.com\UserGroup01
    • Username@NetBIOS name, for example, UserGroup01@vdesktop
    • Username@FQDN, for example, UserGroup01@vdesktop.huawei.com

UserGroup01

Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 24188

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next