No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the VM OS

Configuring the VM OS

Scenarios

On the FusionCompute portal, configure the OS on a VM as required.

NOTE:

This section uses the Windows 7 Professional 32-bit OS as an example.

Data

For details about key data and parameters, see the description given in specific procedures.

Procedure

Install the Driver Tools.

  1. Install the Driver Tools for different OSs. For details, see Table 3-12.

    Table 3-12 Installing the Driver Tools

    VM OS

    Procedure

    Windows 7, Windows 8.1, Windows Server 2008, Windows Server 2012

    1. On the FusionCompute portal, locate the row of the VM to be operated, choose More > Mount Tools, and click OK twice.
    2. Go to the VM CD-ROM directory, right-click Setup and choose Run as administrator from the shortcut menu. Install the software as prompted. During the installation, retain the default settings.
    3. After the software is installed, restart the VM once or twice as prompted, and then log in to the VM using the Administrator account.
    4. On the FusionCompute portal, locate the row that contains the target VM, and choose More > Unmount Tools to uninstall the CD-ROM drive.

    Windows 10

    • FusionSphere V100R005C10U1 or earlier
      1. Decompress software package FusionSphere SIA Vx.x.xx.xxx_GuestOSDriver for FusionSphere V100R00xCxx.zip, and find the pvdriver-windows.iso file in for FusionCompute\01 PVDriver.
      2. Mount the iso file to the VM.
      3. Go to the VM CD-ROM directory. In the PVDriver directory, right-click pvdriver-win10-xxx.exe, choose Run as Administrator from the shortcut menu, and install the software as prompted using the default settings.
    • FusionSphere V100R006C00 or later
      1. On the FusionCompute portal, locate the row of the VM to be operated, choose More > Mount Tools, and click OK twice.
      2. Go to the VM CD-ROM directory, right-click Setup and choose Run as administrator from the shortcut menu. Install the software as prompted. During the installation, retain the default settings.
      3. After the software is installed, restart the VM once or twice as prompted, and then log in to the VM using the Administrator account.
      4. On the FusionCompute portal, locate the row that contains the target VM, and choose More > Unmount Tools to uninstall the CD-ROM drive.

    Windows Server 2016

    • FusionSphere V100R006C00 or earlier
      1. Decompress software package FusionSphere SIA Vx.x.xx.xxx_GuestOSDriver for FusionSphere V100R00xCxx.zip, and find the pvdriver-windows.iso file in for FusionCompute\01 PVDriver.
      2. Mount the iso file to the VM.
      3. Go to the VM CD-ROM directory. In the PVDriver directory, right-click pvdriver-win2016-xxx.exe, choose Run as Administrator from the shortcut menu, and install the software as prompted using the default settings.
    • FusionSphere V100R006C10 or later
      1. On the FusionCompute portal, locate the row of the VM to be operated, choose More > Mount Tools, and click OK twice.
      2. Go to the VM CD-ROM directory, right-click Setup and choose Run as administrator from the shortcut menu. Install the software as prompted. During the installation, retain the default settings.
      3. After the software is installed, restart the VM twice as prompted, and then log in to the VM using the Administrator account.
      4. On the FusionCompute portal, locate the row that contains the target VM, and choose More > Unmount Tools to uninstall the CD-ROM drive.

Copy non-ISO files.

  1. Copy non-ISO files, such as OS patches, installation programs of peripheral drivers, and application software, to C:\ on the VM.

    An application can be selected according to Huawei FusionAccess Preferred Applications.

(Optional) Configure DST.

Perform this operation only for regions that use the DST.

  1. Configure DST.

    • If your Windows OS supports DST, perform the following steps:
      1. On the VM, click the Date and Time area in the taskbar. In the displayed dialog box, click Change date and time settings.
      2. Click Change time zone.
      3. On the Time Zone Settings page, select a time zone based on the actual region and click OK twice.
    NOTE:

    If Automatically adjust clock for Daylight Saving Time is displayed on the Time Zone Settings page, select it.

    • If your Windows OS does not support DST, obtain TZEDIT.exe from DST modification tool, and set the DST as prompted.

Install the OS patches.

  1. Install OS patches by referring to Table 3-13.

    NOTE:

    You can obtain OS patches by referring to Obtaining Software.

    • If the OS patch is an .iso file, mount the CD-ROM drive and run the installation program.

      After the installation is complete, unmount the CD-ROM drive from the VM. Otherwise, the CD-ROM drive cannot be mounted to another VM that runs on the same host.

    • If the OS patch is not an .iso file, find the patch in C:\ on the VM and run the installation program.
    Table 3-13 Installing OS patches

    VM OS

    Procedure

    Windows 7, Windows Server 2008 R2

    • Install patch KB976932 and the KB4012212 ransomware patch in sequence for Windows 7.
    • Install the KB4012212 ransomware patch only for Windows Server 2008 R2.

    Windows 8.1

    Install the summary update patch in this path: https://support.microsoft.com/en-us/help/2919355/windows-rt-8-1-windows-8-1-and-windows-server-2012-r2-update-april-201

    Windows 10

    • When you create a linked clone or full memory VM template, if Windows 10 Version 1607 (Build 14393) is used, ensure that patch KB3201845 or the latest patch released by Microsoft has been installed on VMs. Before installing the patch, ensure that patch files are copied to the directories except the root directory and Windows directory on the system disk.
    • Install the KB4013429 ransomware patch, which is only for the Windows 10 1607 version.
    • For Windows 10 VMs, only LTSB and CBB are supported. You are advised to update the VM patch using Windows Server Update Services (WSUS). For details about patch version mapping, see Huawei FusionCloud Compatibility Check Assistant.

    Windows Server 2012 R2

    Windows Server 2016

    When you create a linked clone or full memory VM template, if Windows Server 2016 (Build 14393) is used, ensure that patch KB3201845 or the latest patch released by Microsoft has been installed on VMs. Before installing the patch, ensure that patch files are copied to the directories except the root directory and Windows directory on the system disk.

    Other supported OSs

    Install OS patches as required.

(Optional) Install the peripheral drivers.

  1. Install the peripheral drivers as required.

    Search the C:\ directory on the VM for the peripheral driver installation programs and install them.

    NOTE:

    If a driver can be installed only when the peripheral is connected to a TC, copy the driver installation programs to the VM and ask the user to install the driver when the peripheral is connected.

(Optional) Initialize the data disk.

You must perform this operation when adding a data disk to a VM.

  1. On the taskbar of the VM OS, choose Start, and enter compmgmt.msc in Search programs and files to go to the Computer Manage window.
  2. Expand Storage in the navigation tree and choose Disk Management.

    The Initialize Disk window is displayed.

  3. Click OK.

    NOTE:

    If the disk to be initialized is in the Offline state, right-click the disk and choose Online from the shortcut menu, and then right-click the disk again and choose Initialize Disk.

  4. In the right area similar to Figure 3-3, right-click the disk and choose New Simple Volume from the shortcut menu.

    The New Simple Volume Wizard window is displayed.

    Figure 3-3 New Simple Volume

  5. Create simple volumes as required.

    NOTE:

    After volumes are created for a full copy template, you must manually change the drive letters. In the Disk Management window, right-click each volume, choose Change Drive Letter and Paths, and change the drive letters of data disks and CD-ROM. You are advised to change the drive letters in alphabetical order of D and E because they will be rearranged in alphabetical order after template encapsulation.

(Optional) Configure the local security policy.

NOTE:

The following operations are mandatory for Windows 10 and Windows Server 2016 OSs only.

  1. On the VM, click , enter secpol.msc, and press Enter.

    The Local Security Policy dialog box is diaplayed.

  2. In the navigation pane on the left, choose Local Policies > Security Options, and select User Account Control: Admin Approval Mode for the Built-in Administrator account.

    The User Account Control: Admin Approval Mode for the Built-in Administrator account Attirbute dialog box is displayed.

  3. Ensure that this parameter is set to Disabled.
  4. Click OK.
Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 22120

Downloads: 59

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next