No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the VM IP Address

Modifying the VM IP Address

Scenarios

Modify VM IP address settings. This operation must be performed by the system administrator and the VM user together.

The operation process is as follows:

  1. The system administrator checks the VM MAC binding status and ensures that the MAC address is unbound from the VM.
  2. The system administrator asks the VM user to change the VM IP address.
  3. The VM user changes the IP address and notifies the system administrator.
  4. The system administrator performs IP synchronization and binds the MAC address and the VM.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

  • You have logged in to the FusionAccess portal. For details, see Logging In to FusionAccess.
  • You can open the Desktop page using the browser.

Data

Data preparation is not required for this operation.

Procedure

Check the MAC binding status of the VM.

  1. On the FusionAccess portal, choose Desktop > All Computers.
  2. Click Select Column, select Obtain IP and MAC binding, and click OK.

    The status of Obtain IP and MAC binding of all the VMs are displayed.

  3. Check whether MAC binding of the VM to be modified is Disable.

    NOTE:

    MAC binding must be Disable if Obtain IP is DHCP, that is, VM IP addresses are allocated by the DHCP server.

    • If no, go to 4.

Disable MAC binding.

  1. Select the VM to be modified from the VM list, click Advanced Function, and select Modify VM IP from the drop-down list.

    The Modify VM IP address list page is displayed.

  2. Deselect MAC binding and click OK.

    NOTE:

    You cannot change the MAC address binding status for the VMs in the Migrating or Recovering state.

  3. In the displayed dialog box, click Confirm.
  4. Click OK.

    MAC binding is disabled.

Change the VM IP address locally.

  1. Change the VM IP address.

    This operation is performed by the VM user.

Perform IP synchronization.

  1. Select the VM from the VM list, click Advanced Function, and select Modify VM IP from the drop-down list.

    The Modify VM IP address list page is displayed.

  2. Select IP synchronization in the list and click OK.

    NOTE:

    IP synchronization can be performed only when the VM is in the Running state.

  3. In the displayed dialog box, click Confirm.
  4. Click OK.

    IP synchronization is complete.

Enable MAC binding.

  1. Select the VM from the VM list, click Advanced Function, and select Modify VM IP from the drop-down list.

    The Modify VM IP address list page is displayed.

  2. Select MAC binding in the list and click OK.

    NOTE:

    You cannot change the MAC address binding status for the VMs in the Migrating or Recovering state.

  3. In the displayed dialog box, click Confirm.
  4. Click OK.

    The MAC address and the VM are bound.

Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 22106

Downloads: 59

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next