No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Provisioning Graphics Workstations in Import Mode

Provisioning Graphics Workstations in Import Mode

Scenarios

Provisioning graphics workstations in import mode includes the following scenarios. This section uses scenario 1 as an example.

Add graphics workstations to FusionAccess for management.
  • Graphics workstations managed by FusionAccess are called hosting computers.
  • Hosting graphics workstations supports the not used type and the used type.
  • If you want to manage the hosting computer again after the managed hosting computer is deleted, ensure that the hosting computer has been correctly added to the domain and perform all the operations described on this page.
NOTE:

When selecting an operating environment, select Graphics Workstations.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

  • You have prepared a graphics workstation to be hosted.
  • Ensure that the network connection between the hosting computer and FusionAccess is always normal.
  • You have logged in to the FusionAccess portal. For details, see Logging In to FusionAccess.
  • You have configured the browser. The Desktop page can be properly displayed.
  • You have obtained the template tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso.

Data

For details about the parameters required for this task, see Parameters for Adding VMs.

Procedure

Use the template tool to configure the VM OS.

  1. Log in to the graphics workstation as user Administrator.
  2. Mount the template tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso to the VM.
  3. On the graphics workstation, double-click the CD-ROM.
  4. Double-click run.bat.

    The FusionAccess Windows Installer window is displayed.

  5. Click Make desktop agent.

    On the Make desktop agent window, configure the HDA as prompted.

Discover hosting computers.

  1. On the FusionAccess portal, choose Desktop > All Computers > Unmanaged Computer.
  2. Click Manage Discovery Task.

    The Manage Discovery Task page is displayed.

  3. Select Desktop.

    NOTE:

    The Desktop is the HDC server configured in System > Initial Configuration > Desktop Components.

  4. Click Start.

    A confirmation dialog box is displayed.

  5. Click Confirm.

    A confirmation dialog box is displayed.

  6. Click Confirm.

    The hosting computer discovery task starts.

    NOTE:

    The discovery task automatically stops when the preset end time reaches, or you can manually stop the task.

Check the use status of hosting computers.

  1. Check whether the hosting computers to be imported are being used.

Import hosting computers that are not being used.

  1. On the FusionAccess portal, choose Desktop > VM Group.

    The page for managing VM groups is displayed.

  2. In the list, select a VM group whose VM group type is Hosting Computer and click Import VM.

    NOTE:

    If there is no corresponding VM group in the list, click Create VM Group, enter related information, and click Finish.

    • Service Type: VDI
    • VM group name: Set this parameter based on the actual plan.
    • VM group description: Set this parameter based on the actual plan.
    • VM group type: Hosting Computer

    The Import VM page is displayed.

  3. In VM list, click Add to add hosting computers to be imported.
  4. Click OK.
  5. Click Finish.
  6. In the displayed dialog box, click Confirm.
  7. Click Return to VM Group.

Assign VMs.

  1. On the FusionAccess portal, choose Desktop > Desktop Group.

    The page for managing desktop groups is displayed.

  2. On the desktop group management page, select the target desktop group in the list, and click Assign VM.

    NOTE:

    If there is no corresponding desktop group in the list, click Create Desktop Group, enter related information, and click Finish.

    • Desktop: Desktop01
    • Desktop group name: Set this parameter based on the actual plan.
    • Desktop group type: Set this parameter based on the actual plan.
    • VM type: Hosting Computer
    • Desktop group description: Set this parameter based on the actual plan.

    The Assign VM page is displayed.

  3. Configure basic information about the desktop group based on the data plan.

    NOTE:
    • If the assignment type is Multiple Users:
    • If user A has logged in to a VM, user B cannot log in to the VM.
    • If user A disconnects from a VM without logging out, user B can log in to the VM and user A will be forcibly logged out of the VM at that time.
    • In a pool desktop scenario, to ensure all users in user group A can log in to the pool desktop that is allocated to user group A, all the users must directly belong to user group A.

      For example, in a scenario where user a belongs to department A and department A belongs to department C, user a can directly log in to the pool desktop if the pool desktop is allocated to department A but cannot log in to the pool desktop if the pool desktop is allocated to department C.

  4. Click OK.

    The system displays a message indicating that the VM is assigned.

  5. Click Return to Desktop Group List.

    The page for managing desktop groups is displayed. You can view the information about the desktop group on the page.

    NOTE:

    When logging in to the VM for the first time, change the Administrator password immediately.

Import hosting computers that are being used.
NOTE:

If the hosting computers to be imported are being used, the following conditions must be met:

  • The graphics workstations to be added have been added to a domain.
  • The graphics workstations to be added have been assigned to end users.
  • In application virtualization scenarios, graphics workstations cannot be imported as hosting computers.
  • In a pool desktop scenario, to ensure all users in user group A can log in to the pool desktop that is allocated to user group A, all the users must directly belong to user group A.

    For example, in a scenario where user a belongs to department A and department A belongs to department C, user a can directly log in to the pool desktop if the pool desktop is allocated to department A but cannot log in to the pool desktop if the pool desktop is allocated to department C.

  1. On the FusionAccess portal, choose Desktop > Desktop Group.

    The page for managing desktop groups is displayed.

  2. On the page for managing desktop groups, select the desktop group whose VM Type is Hosting Computer.

    NOTE:

    If there is no corresponding desktop group in the list, click Create Desktop Group, enter related information, and click Finish.

    • Desktop: Desktop01
    • Desktop group name: Set this parameter based on the actual plan.
    • Desktop group type: Set this parameter based on the actual plan.
    • VM type: Hosting Computer
    • Desktop group description: Set this parameter based on the actual plan.

    The Assign VM page is displayed.

  3. Click Import VM in Advanced Function.

    The page for importing hosting computers is displayed.

  4. Set parameters based on Desktop group type.

    • Static Pool: Set Domain name and Select VM group based on actual conditions.
    • Private: Set Domain name, Set assignment type, and Select VM group based on actual conditions.

  5. In VM list, click Add to add hosting computers to be imported.
  6. Click OK.
  7. Click Finish.
  8. In the displayed dialog box, click Confirm.
  9. Click Return to VM Group.
Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 20835

Downloads: 57

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next