No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Naming Rule

Creating a Naming Rule

Scenarios

On the FusionAccess portal, create naming rules for VMs.

Prerequisites

You have logged in to FusionAccess. For details, see Logging In to FusionAccess.

Data

Table 3-16 lists the data to be obtained.

Table 3-16 Data to be obtained

Category

Parameter

Description

Example Value

VM naming rule

Contain AD domain account

Specifies whether the VM name contains the domain name of the user who logs in to the VM.

Value: Yes or No

This parameter cannot be set to No when you set the naming rules for linked clone or full memory VMs.

Yes

Rule name

Identifies a naming rule.

The rule name can contain digits, letters, and underscores (_). It cannot exceed 30 characters.

Default_1_1

Computer name prefix

The VM name consists of the computer name prefix and a number. The computer name prefix must start with a letter or digit and consist of letters, digits, and hyphens (-). It cannot contain only numbers or hyphens. The total length of the computer name prefix and the number cannot exceed 15 characters.

shared-vm

Number of digits

Specifies the number of digits of the number in the VM name. It must be an integer from 1 to 10.

3

Start value

Specifies the start value of the number in the VM name. For example, if the number of digits is 3 and the start value is 1, the VMs created are numbered from 001.

1

VM number

Specifies the sequence in which the VMs are numbered.

Value:

  • Increment by VM per user: The VMs are numbered in ascending order per domain user.
  • Use system-assigned sequence: The VMs are numbered based on the sequence in which the VMs are assigned.

For example, the number of digits is 3, start value is 1, domain user A is assigned with two VMs, and the VM assignment sequence is 2 and 8.

  • If Increment by VM per user is selected, the VMs assigned to user A are named UserA001 and UserA002.
  • If Use system-assigned sequence is selected, the VMs are named UserA002 and UserA008.

Yes

Procedure

  1. On the FusionAccess portal, click Desktop.
  2. In the navigation tree, choose Service Configuration > VM Naming Rule.
  3. Click Add.

    The page for configuring the naming rule parameters is displayed.

  4. Set the following parameters based on the data plan:

    • Contain AD domain account
    • Rule name
    • Computer name prefix
    • Number of digits
    • Start value
    • The digits in names ascend for a single user
    NOTE:

    If you select Contain AD domain account, you must also configure The digits in names ascend for a single user.

  5. Click OK.

    A dialog box is displayed.

  6. Click Confirm.

    The system displays a message indicating that the naming rule is created.

Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 20230

Downloads: 57

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next