No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess Desktop Solution V100R006C20 Windows Desktop Management Guide 09 (FusionSphere V100R006C10 or Earlier)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring System Disks

Restoring System Disks

Scenarios

Forcibly restore the system disk of a linked clone or full memory VM system to its initial state, which does not affect the data disks of the VM.

NOTE:
  • After the system disk is restored, only data stored on data disks will be remained. Data on the system disk such as that on the desktop and in Favorites will be lost. If you want to keep such data, inform the users of backing up it in advance. For full copy VMs, the original system disk can be retained and repurposed as a data disk.
  • You can restore the VMs that meet the following conditions:
    • The running state is Running or Stopped.
    • The assignment status is Assigned.
    • The login status is not In use.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

  • You have logged in to the FusionAccess portal. For details, see Logging In to FusionAccess.
  • You can open the Desktop page using the browser.
  • All the VMs in a VM group have been assigned to users.
  • VMs exist in desktop groups.

Data

Data preparation is not required for this operation.

Procedure

Determine the task to be performed.

  1. Determine the method to restore the system disk in a linked clone, full memory, or full copy VM.

    • To restore the system disk in a linked clone, full memory, or full copy VM, go to Step 2.
    • To restore the system disks of VMs in a linked clone, full memory, or full copy VM group, go to Step 8.
    • To restore the system disks of VMs in a linked clone, full memory, or full copy desktop group, go to Step 14.

Restore the system disks of VMs in a linked clone, full memory, or full copy VM.

  1. On the FusionAccess portal, choose Desktop > All Computers.
  2. Select the VM to be restored, click Advanced Function, and select Restore System Disk from the drop-down list.

    NOTE:

    You can select multiple VMs of the same type and restore the system disks in a unified manner. However, you cannot perform this operation for VMs of different types.

    The Set Restore Policy dialog box is displayed.

  3. Set the restore policy and notification message as prompted.

    • If the VM is being used or has import data to save later, select Next startup (Not now).
    • If the VM is not in use or has no import data to be saved, select Immediately (Forced restore).

  4. Click OK.

    The Warning dialog box is displayed.

  5. Click OK.

    The Succeeded dialog box is displayed.

  6. Click OK.

Restore the VMs' system disks in a linked clone, full memory, or full copy VM group.

  1. On the FusionAccess portal, choose Desktop > VM Group.

    The page for managing VM groups is displayed.

  2. Select the VM group to be restored and click Restore System Disk.

    The Set Restore Policy dialog box is displayed.

  3. Set the restore policy and notification message as prompted.

    • If the VMs in the VM group are in use or have important data to save later, select Next startup (Not now).
    • If the VMs in the VM group are not in use or have no important data to save, select Immediately (Forced restore).

  4. Click OK.

    The Warning dialog box is displayed.

  5. Click OK.

    The Succeeded dialog box is displayed.

  6. Click OK.

Restore the system disks of VMs in a linked clone, full memory, or full copy desktop group.

  1. On the FusionAccess portal, choose Desktop > Desktop Group.

    The page for managing desktop groups is displayed.

  2. Select the desktop group to be restored and click Restore System Disk.

    The Set Restore Policy dialog box is displayed.

  3. Set the restore policy and notification message as prompted.

    • If the VMs in the desktop group are in use or have important data to save later, select Next startup (Not now).
    • If the VMs in the desktop group are not in use or have no important data to save, select Immediately (Forced restore).

  4. Click OK.

    The Warning dialog box is displayed.

  5. Click OK.

    The Succeeded dialog box is displayed.

  6. Click OK.
Translation
Download
Updated: 2019-04-25

Document ID: EDOC1000182394

Views: 24012

Downloads: 60

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next