No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun Mission Critical Server V100R001 SNMP Interface Description 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Trap Specifications

Trap Specifications

This chapter describes OID specifications for SNMP trap alarms.

The ID of an SNMP trap can be an event code or the OID of an SNMP node. The OID mode is recommended. Each OID corresponds to a type of alarm.

You can select to-be-bound variables for each event from the following ones, depending on the alarm type:

  • hwTrapSeq
  • hwTrapSubjectName
  • hwTrapDescription
  • hwTrapServerity
  • hwTrapEventCode
  • hwTrapEventID
  • hwTrapEventTime
  • hwTrapSource

The following sections list the values of hwTrapEventCode of each alarm for your reference.

Deasserted alarms in the following sections are clear alarms.

Updated: 2019-05-20

Document ID: EDOC1000183806

Views: 253621

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next