No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun Mission Critical Server V100R001 SNMP Interface Description 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Function Description

Function Description

Simple node query and setting of the trap table: allows users to view and set the trap function status (enabled or disabled), trap mode, trap version, and trap alarm severity. The table node trapInfoDescriptionTable of the trap module describes the address and port number for receiving traps.

The node OID format of the trap table is as follows:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).products(2).hwServer(235).hwCMC(5).hwiCMC(1).cmc(2).trap(1)

Node Name

Node OID Instance

Description

Type

Permission

trapEnable

1.3.6.1.4.1.2011.2.235.5.1.2.1.1.0

enable (1)

disable (2)

Integer32

read-write

trapCommunity

1.3.6.1.4.1.2011.2.235.5.1.2.1.2.0

SNMP trap community, consisting of 8 to 32 characters.

A community supports all characters except space.

DisplayString

read-write

trapMode

1.3.6.1.4.1.2011.2.235.5.1.2.1.3.0

eventCodeMode (1)

trapOidMode( 2)

Integer32

read-write

trapVersion

1.3.6.1.4.1.2011.2.235.5.1.2.1.4.0

v1 (1)

v2c (2)

v3 (3)

Integer32

read-write

trapFilterAlarmLevel

1.3.6.1.4.1.2011.2.235.5.1.2.1.5.0

Trap filter alarm severity:

critical, major, minor, ok

OCTET STRING

read-write

The trapInfoDescriptionEntry node describes the leaf nodes under the trapInfoDescriptionTable table node. The node OID format of the trapInfoDescriptionEntry table is as follows:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).products(2).hwServer(235).hwCMC(5).hwiCMC(1).cmc(2).trap(1).trapInfoDescriptionTable(10).trapInfoDescriptionEntry(1)

Note: x indicates the trap server number. The value ranges from 1 to 5.

Node Name

Node OID Instance

Description

Type

Permission

trapReceiverIndex

1.3.6.1.4.1.2011.2.235.5.1.2.1.10.1.1.x

Trap receiver index.

INTEGER

read-only

trapReceiverAddress

1.3.6.1.4.1.2011.2.235.5.1.2.1.10.1.3.x

Trap receiver IPv4 address.

IpAddress

read-write

trapReceiverPort

1.3.6.1.4.1.2011.2.235.5.1.2.1.10.1.4.x

Trap receiver port.

Integer32

read-write

Download
Updated: 2019-05-20

Document ID: EDOC1000183806

Views: 245274

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next