No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH321 V5 Server Node V100R005 Maintenance and Service Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FusionServer Tools SmartKit

FusionServer Tools SmartKit

SmartKit is a tool kit integrating tools required for deploying, maintaining, and upgrading servers in batches. It simplifies server O&M and improves O&M efficiency.

For more information about SmartKit, see FusionServer Tools 2.0 SmartKit User Guide.

Table 12-1 lists the operations supported by SmartKit.

Table 12-1 Operations supported by SmartKit

Operation

Description

iBMC configuration

Perform iBMC configuration for servers in batches.

BIOS Configuration

Perform BIOS configuration for servers in batches.

HMM configuration

Perform HMM configuration for servers in batches.

V5 RAID configuration

Perform RAID configuration for servers in batches.

V2/V3 RAID configuration

IP address configuration

Configure BMC IP addresses for servers in batches.

Health check

Perform health check for servers in batches. Visualized health reports are provided, helping users to learn about the server running status in real time.

Power control

Perform power control of servers in batches, including resetting the iBMCs, and powering on or off or restarting servers in batches.

Log collection

Collect the hardware and OS logs of servers in batches by simply clicking the mouse.

Firmware update

Update the BMC, BIOS, CPLD, and Smart Provisioning firmware of servers in batches.

PCIe card or drive firmware update

Update the PCIe card firmware or drive firmware by mounting the virtual media.

Upgrade evaluation

Perform an evaluation of E9000 switch modules in batches before an upgrade.

E9000 upgrade

Upgrade the E9000 switch modules and E9000 chassis in batches.

Device change

Allow specific functions to be automatically implemented by using customized programs.

V5 configuration check

Check the iBMC, BIOS, and RAID configurations of V5 servers in batches.

V2/V3 configuration check

Export BIOS configurations of V2 and V3 servers in batches.

Burn-in test

Test the CPUs, memory modules, drives, and link bit errors of servers in batches.

Device repair

Restore the servers whose iBMC failed to start due to an exception in data collection.

V3 server OS deployment

Install the operating system on V3 servers in batches using SerivceCD 2.0.

Hardware diagnosis

Perform hardware diagnosis using FusionServer Tools Toolkit.

iBMC log analysis

Parse iBMC logs to analyze and locate faults.

E9000 switch module log analysis

Perform analysis of switch module logs. The configuration information and status of switch modules are displayed in graphics, helping locate network problems.

SmartKit allows only read operations during health check and log collection and does not collect customers' service information. After a health check or log collection is complete, the log collection script and files will be automatically deleted.

Download
Updated: 2019-12-25

Document ID: EDOC1000183891

Views: 30188

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next