No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH321 V5 Server Node V100R005 Maintenance and Service Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing an M.2 FRU on the Avago SAS3004iMR PCIe RAID Controller Card

Removing an M.2 FRU on the Avago SAS3004iMR PCIe RAID Controller Card

The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.

Procedure

  1. Determine the positions and slots of the M.2 FRUs on the Avago SAS3004iMR RAID controller card.

    Determine the position of the M.2 FRU to be removed. Do not remove the M.2 FRU running an OS. Otherwise, all services on the server node will be affected.

    Figure 8-27 Positions and slots of the M.2 FRUs

  2. Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.

    1. Open the handle of the M.2 FRU. See (1) in Figure 8-28.
    2. Remove the M.2 FRU. See (2) in Figure 8-28.
    Figure 8-28 Removing an M.2 FRU

  3. Place the removed component in an ESD bag.
  4. Install an M.2 FRU filler module to shield the EMC.

    Perform this step only when an M.2 FRU is not installed immediately.

Download
Updated: 2019-12-25

Document ID: EDOC1000183891

Views: 30353

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next