No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

FusionServer Pro XH321 V5 Server Node V100R005 Maintenance and Service Guide 09
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


  • The server supports one or two processors.
  • If only one processor is required:
    • Install it in socket CPU1.
    • NVMe SSDs are not supported.
  • The processor heat sink varies depending on the processor power:
    • If the maximum processor power is 165 W, use a narrow conjoined heat sink.
    • If the processor power is higher than 165 W, use a wide conjoined heat sink.
  • The same model of processors must be used in a server.
  • Contact your local Huawei sales representative or use the Intelligent Computing Compatibility Checker to determine the components to be used.
Figure 2-6 Processor positions
Updated: 2020-03-23

Document ID: EDOC1000183891

Views: 35277

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next