No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH321 V5 Server Node V100R005 Maintenance and Service Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Avago SAS3004iMR PCIe RAID Control Card

Installing the Avago SAS3004iMR PCIe RAID Control Card

Procedure

  1. Power off the server node.

    For details, see Power-Off Procedure.

  2. Remove the server node.

    For details, see Removing an XH321 V5.

  3. Place the server node on the ESD workstation.
  4. Take the spare part out of its ESD bag.
  5. Determine the position of the Avago SAS3004iMR RAID controller card.
  6. Install the Avago SAS3004iMR RAID controller card.

    For details, see Installing a PCIe Card.

  7. Install the M.2 FRU on the Avago SAS3004iMR RAID controller card.

    For details, see Installing an M.2 FRU on the Avago SAS3004iMR PCIe RAID Controller Card.

  8. Install the server node.

    For details, see Installing an XH321 V5.

  9. Power on the server node.

    For details, see Power-On Procedure.

Download
Updated: 2019-12-25

Document ID: EDOC1000183891

Views: 31041

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next