No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

WLAN V200R008C10 Typical Configuration Examples

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Soft GRE profile

Soft GRE profile

Before configuring soft GRE tunnel forwarding, configure a soft GRE profile first so that data packets can be forwarded according to parameters configured in the profile. For details, see (Optional) Configuring a Soft GRE Profile.
  • In a soft GRE profile, the destination address of the soft GRE tunnel must be configured to specify the destination to which service data is forwarded.
  • A soft GRE tunnel is not capable of detecting tunnel status. If the remote interface is unreachable, the soft GRE tunnel cannot be immediately tore down. As a result, the source end continues sending data to the remote end, wasting device resources and bandwidth of the intermediate network.

    The Keepalive detection function can monitor the soft GRE tunnel status to check whether the remote end is reachable. If the remote end is unreachable, the source end tears down the tunnel immediately to reduce resource waste and bandwidth occupation.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000184389

Views: 90428

Downloads: 458

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next