No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

WLAN V200R008C10 Typical Configuration Examples

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Switching a Fit AP with Factory Defaults to the Fat Mode by One Command

Example for Switching a Fit AP with Factory Defaults to the Fat Mode by One Command

Applicable Scope

This example is applicable to APs with factory defaults. APs work in Fit mode by default.

NOTE:

With factory defaults, the local configuration of an AP is not modified, and the AP has not obtained the new configuration from an AC.

Applicable version: V200R007, V200R008, V200R009 and V200R010

Applicable model: AP5050DN-S, AP2051DN, AP2051DN-S, AP2051DN-E, AP1050DN-S, AD9431DN-24X, AP2050DN, AP2050DN-S, AP2050DN-E, AP4050DN-HD, AP4050DN-E, AP7050DN-E, AP7050DE, AD9430DN-12, AD9430DN-24, AP6150DN, AP6050DN, AP8130DN, AP8030DN, AP4050DN, AP4051DN, AP4151DN, AP4050DN-S, AP8050DN, AP8150DN, AP8050DN-S, AP4051TN, AP6052DN, AP7052DN, AP7152DN, AP7052DE, AP8050TN-HD, AP8082DN, AP8182DN,

Networking Scenario

To use a new AP independently provide Wi-Fi coverage, you need to switch the AP to the Fat mode and deploy services through the web platform or other way.

Connect the AP to a PC through an Ethernet cable in a proper mode, as shown in Figure 4-11.

When the AP supports DC power supply and works with a power adapter, connect the AP to the AC directly through an Ethernet cable. If the AP does not support DC power supply or no adapter is available, supply PoE power to the AP. In this case, connect the AP to the PC through a PoE device.

Figure 4-11 AP-PC connection diagram

Quick Configuration

This section helps you quickly configure an AP, without the need to read the entire document. If you are not familiar with the product or operation, read the detailed guidance in the following sections.

Procedure

Task

1

Prepare the environment: Configure the IP address of the PC and STelnet, check network connectivity between the AP and PC, and observe indicator states.

2

Check AP information: On the PC, log in to the AP through STelnet to check the version and working mode of the AP.

3

Start the switching: Run the ap-mode-switch fat command in the system view to switch the working mode of the AP. The AP then restarts.

4

Verify the switching: Log in to the AP again and check the working mode of the AP.

Configuration Procedure

  1. Prepare the environment.

    The following is used as an example. Prepare your environment based on site requirements.

    Device

    Description

    PC

    Operating system: Windows 7

    STelnet client: PuTTY (third-party software)

    AP

    Model: AP4050DN

    Version: V200R007C20

    Default information:

    • IP address: 169.254.1.1
    • User name: admin
    • Password: admin@huawei.com
    • STelnet login port number: 22

    # Power on the AP. The indicator is green for around 2 minutes during the startup. When the indicator blinks, the AP is started successfully.

    # Set the IP address of the PC to 169.254.1.100 and mask to 255.255.0.0 so that the PC and AP are located on the same network segment.

  2. Check AP information.

    # Open PuTTY on the PC, enter the IP address and port number of the AP, select the SSH mode, and click Open. If a key pair information prompt is displayed, click Yes.

    # When the following information is displayed, the AP is connected successfully. Enter the user name and password to log in to the AP.

    login as: admin
    Further authentication required
    admin@169.254.1.1's password:admin@huawei.com  //For information security, characters you entered are invisible.
    
    Info: Current mode: Fit (managed by the AC).  //The current mode is Fit.
    Info: You are advised to change the password to ensure security.
    <Huawei>

    # Check AP information.

    <Huawei> display  version
    Huawei Versatile Routing Platform Software
    VRP (R) software, Version 5.170 (AP4050DN FIT V200R007C20SPCa00)  //Model, working mode, and version
    ...

  3. Start the switching.

    # Switch the AP mode to Fat. The AP will restart and the restart takes around 2 minutes.

    <Huawei> system-view
    [Huawei] ap-mode-switch fat
    Warning: The system will reboot and start in fat mode of V200R007C20SPCa00. Continue? (y/n)[n]:y
    Info: system is rebooting ,please wait.................

  4. Verify the switching.

    # Log in to the AP to view AP information. The AP is working in Fat mode.

    login as: admin
    Further authentication required
    admin@169.254.1.1's password:admin@huawei.com
    
    Info: Current mode: Fat (working independently).
    Warning: The default country code is CN. Ensure that AP radio attributes comply 
    with laws and regulations in different countries. Do you want to change the 
    country code? [Y/N]:n
    Info: You are advised to change the password to ensure security.
    <Huawei> system-view
    [Huawei] display  version
    Huawei Versatile Routing Platform Software
    VRP (R) software, Version 5.170 (AP4050DN FAT V200R007C20SPCa00)
    ...

FAQ

An error message is displayed when you run a mode switching command.

[Huawei] ap-mode-switch fat
Error: The fat mode does not exist. To switch to the fat AP mode, run the ap-mode-switch fat tftp/ftp/sftp command. 

The AP is not in factory defaults and therefore cannot be switched to the Fat mode by one click. In this case, switch the working mode of the AP using SFTP. For details, see the related sources.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000184389

Views: 91093

Downloads: 460

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next