No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

WLAN V200R008C10 Typical Configuration Examples

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Serial Profile

Serial Profile

An AP communicates with an IoT card through a serial port. Each IoT card interface uses independent serial communication parameters and framing parameters. By default, an IoT card interface is bound to the preset serial profile preset-enjoyor-toeap. The default values of the parameters are as follows:

An AP communicates with an IoT card through a serial port. Each IoT card interface uses independent serial communication parameters and framing parameters. The serial communication parameters and framing parameters can be set in a serial profile.

For details, see Configuring Interworking Between RFID Cards and APs in the Configuration - Healthcare IoT Solution.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000184389

Views: 90721

Downloads: 460

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next