No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


WLAN V200R008C10 Typical Configuration Examples

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Provisioning Profile

AP Provisioning Profile

To facilitate maintenance and management, an AP provisioning profile is designed so that you can run commands on a Fit AP after logging in to the Fit AP. You can also configure parameters in an AP provisioning profile and manually deliver configurations to specified APs or AP groups. For details, see Configuring AP Online Parameters(AP Provisioning View) or Switching the Working Mode of an AP in the Configuration-AP Management Configuration Guide.

Parameters in an AP provisioning profile are configured for an AP to go online, including
  • the AP name, group to which an AP belongs, mode of obtaining an IP address, static IP address, gateway address, and AC IP address list.
  • Configure the running mode of the AP. Set the running mode of the AP to switch between the Fat AP and cloud AP modes.
Updated: 2019-03-30

Document ID: EDOC1000184389

Views: 90506

Downloads: 458

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next