No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

WLAN V200R008C10 Typical Configuration Examples

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Regulatory Domain Profile

Regulatory Domain Profile

A regulatory domain profile provides configurations of country code, calibration channel, and calibration bandwidth for an AP.
  • A country code identifies the country to which AP radios belong. Different countries support different AP radio attributes, including the transmit power and supported channels. Correct country code configuration ensures that radio attributes of APs comply with laws and regulations of countries and regions to which the APs are delivered. For details, see Configuring Country Codes in the Configuration-WLAN Service Configuration Guide.
  • A calibration channel set limits the dynamic AP channel adjustment range when the radio calibration function is configured. Radar channels and the channels that are not supported by STAs are avoided. For details, see Radio Resource Management Configuration Guide in the Configuration.
  • The 5 GHz frequency band has richer spectrum resources. In addition to 20 MHz channels, APs working on the 5 GHz frequency band support 40 MHz and 80 MHz channels, Different calibration bandwidths support different calibration channels. Larger-bandwidth channels mean higher transmission rates. However, at least three channels are required in radio calibration to achieve the optimal calibration effect. When configuring the calibration bandwidth, ensure that enough calibration channels are available for use. For details, see Radio Resource Management Configuration Guide in the Configuration.
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000184389

Views: 90133

Downloads: 456

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next