No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TE30 Videoconferencing Endpoint V600R006C10 Product Description

Describes the features, network, and technical specifications of the TE30 videoconferencing endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Front Panel and Rear Panel

Front Panel and Rear Panel

Figure 4-2 shows the parts on the front and rear panels, and Table 4-1 describes these parts.

For details about the status of the indicators, see Checking Indicator Status.

Figure 4-2 Parts on the front and rear panels

Table 4-1 Parts description





Built-in microphone

Provides 180-degree sound pickup with an optimal range of six meters.



Shoots video of the local site with 12x optical zoom.


MODE button

  • When the TE30 is running, press and hold the MODE button for 10s to reset the TE30 to factory settings. You can also press this button to make the TE30 sleep or wake up.
  • When the TE30 is powering on, press and hold this button for 3s to enter the mini system.
If the endpoint is used in a conference or being upgraded, it will not go to sleep after you press the MODE button. Instead, a message is displayed on the remote control UI.


Infrared receiver module

Receives infrared signals from the remote control that comes with the endpoint.


OLED display

Displays the IP address, site number, and indications for startup, upgrade, sleep, and malfunction.


Status indicator

Shows whether the TE30 is running, sleeping, upgrading, or malfunctioning.


SELECT button

When the endpoint is running:
  • Press this button to switch the VGA OUT port between VGA and YPbPr modes.
  • Press and hold this button for 10s to restore the TE30 to the last backed up settings.


USB port

Connects to a USB device, such as a removable hard disk, USB flash drive, or data card, or connects to a USB-to-serial adapter to convert the USB port into a serial port.



3.5 mm (0.14 in.) audio output port, which connects to the audio input port on a display or an external speaker.

LINE IN port

3.5 mm (0.14 in.) audio input port, which connects to an audio input source, such as a computer or a mobile phone.



Functions as an HDMI, Ethernet, microphone, or power port using the provided HD-VI to composite adapter cable provided.


VGA IN port

Connects to a VGA input source, such as a computer or a Digital Video Disc (DVD) player.


VGA OUT port

Exports VGA/YPbPr signals only and connects to the VGA port on a display, for example, a projector.

Updated: 2019-04-28

Document ID: EDOC1000184605

Views: 10830

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next