No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TE30 Videoconferencing Endpoint V600R006C10 Product Description

Describes the features, network, and technical specifications of the TE30 videoconferencing endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Built-in MCU-based Network

Built-in MCU-based Network

NOTE:

The endpoint supports the built-in MCU function only after the required license is imported.

In the CloudVC on-premises networking scheme, the endpoint TE30 can hold multipoint conferences using its built-in MCU, without any intervention of the SMC2.0 or MCU. The built-in MCU makes conference rooms of small- and medium-sized enterprises video-enabled. Figure 3-2 shows the built-in MCU-based network of the endpoint.

Figure 3-2 Built-in MCU-based network

The network is described as follows:
  • After having the built-in MCU enabled, the endpoint TE30 can hold both encrypted and unencrypted conferences.
    • Unencrypted conference: The endpoint TE30 requires a maximum of 4.5 Mbit/s to set up an unencrypted conference. Apart from the endpoint TE30 itself, at most three 576p 30 fps video sites and three audio sites can connect to the conference. Each video site consumes up to 1.5 Mbit/s bandwidth.
    • Encrypted conference: The endpoint TE30 requires a maximum of 3 Mbit/s to set up an encrypted conference. Apart from the endpoint TE30 itself, at most three 576p 30 fps video sites can connect to the conference. Each video site consumes up to 1 Mbit/s bandwidth.
  • SD and HD video sites and audio-only sites of the H.323 or SIP type can join conferences on this network.
    NOTE:

    Audio-only sites can join conferences using IP phones only when the SC is deployed on the network.

  • This network supports presentation sharing through the H.239 protocol, as well as simultaneous video and presentation sharing through the Binary Floor Control Protocol (BFCP).
  • When a site joins a conference, the endpoint automatically adjusts the continuous presence layout to display the video of that site. For example, when there are only two video sites, the continuous presence layout is 2-pane . If a third video site joins in, the continuous presence layout is automatically adjusted to 3-pane . The site that generates the loudest volume is displayed in the largest pane. The local site is not displayed by default.
  • The endpoint with a built-in MCU provides conference control functions, including requesting or releasing chair control rights, allowing or forbidding the chair site, locking or unlocking a conference, and selecting a screen layout.
Translation
Download
Updated: 2019-04-28

Document ID: EDOC1000184605

Views: 11137

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next