No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TE30 Videoconferencing Endpoint V600R006C10 Product Description

Describes the features, network, and technical specifications of the TE30 videoconferencing endpoint.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Indicator Status

Checking Indicator Status

By checking the status of indicators on an endpoint, you can know its running status and ensure that it works well with other videoconferencing devices.

When all cables are connected correctly, connect the TE30 to a power supply using the power adapter. When the power adapter indicator turns on, the TE30 automatically powers on and the Wizard screen is displayed. After the configuration is complete, the menu screen is displayed.

Table 4-2 describes the TE30 indicator status.

Table 4-2 TE30 indicator status

The Indicator Is...

The Endpoint Is...

Blinking green

Powering on or upgrading.

Steady green

Working properly.

Blinking green (on for 1s, off for 2s)


Steady red

Powered off. (Press on the remote control to power off the TE30.)


Disconnected from the power supply.

Blinking red

Confronted with a fault, such as a self-check error, overheating, and software malfunction.

Updated: 2019-04-28

Document ID: EDOC1000184605

Views: 10108

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next