No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Alarms

Checking Alarms

To ensure that your endpoint runs properly, check its alarms regularly.


Regularly check whether the endpoint has alarms. If it has alarms, follow the instructions described in the TE30&TE40&TE50&TE60&TX50&RP100&RP200 Alarm Handling to clear them, ensuring that the endpoint runs properly.


To check alarms on the endpoint, perform the following steps:

  1. Log in to the endpoint web interface as the administrator.
  2. Check whether there are alarm notification messages on the web interface.
  3. Find the handling suggestions for alarms in the TE30&TE40&TE50&TE60&TX50&RP100&RP200 Alarm Handling by alarm ID and clear the alarms accordingly.
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30318

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next