No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Backing Up and Restoring Settings

Backing Up and Restoring Settings

Regularly back up the system configuration file of the endpoint and use the backup file to restore the system after an exception occurs.

Context

  • If some parameter settings under System Settings are inadvertently deleted or modified, you can use this backup file to restore all the settings.
  • Before upgrading the endpoint, it is recommended that you back up the settings under System Settings. If the upgrade fails, you can use the backup data to restore the system.
  • If a configuration backup file is already stored on your endpoint, the new backup configuration file will overwrite the original one.
  • After the restoration is complete, the endpoint will automatically restart. The settings under System Settings will be restored to those contained in the backup configuration file.

Backing Up the Configuration File

The backup procedure is as follows:

  1. Log in to the endpoint web interface as the administrator.
  2. Choose System Settings > Installation.

    The Installation page is displayed.

  3. Click One-Click Backup.

    The One-Click Backup dialog box is displayed.

  4. Click One-Click Backup.

    The endpoint starts backing up its configuration file. When the backup is complete, a success message is displayed.

Using the Backup Configuration File to Restore the System

The restoration procedure is as follows:

  1. Log in to the endpoint web interface as the administrator.
  2. Choose System Settings > Installation.

    The System Status page is displayed.

  3. Click One-Click Backup.

    The One-Click Backup dialog box is displayed.

  4. Click Restore Backup Settings.

    The endpoint starts using the backup configuration file to restore the system.

    NOTE:

    When the restoration is complete, the endpoint automatically restarts.

Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30543

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next