No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Sites

Viewing Sites

After the video monitoring function is enabled, you can view the video and presentation of local and remote sites on the endpoint web interface.


The video monitoring function has been enabled. This function can be enabled only on the user interface using the remote control. To enable the video monitoring function, choose Advanced > Settings > Secured > Web Login and select Monitor video.

This function involves personal privacy. Ensure that its use complies with local laws and regulations.


Log in to the web interface, choose Device Control > Device Control, and click the Video Control tab to view the video of local and remote sites, as shown in Figure 2-4.

Figure 2-4 Viewing the video

You can click the drop-down list box to select the video source to view, or click Capture to capture a picture of the video that is being played.

Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30469

Downloads: 162

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next