No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Maintenance Guide

TE30, TE40, TE50, TE60, and TX50 Videoconferencing Endpoint V600R006C10

This document guides the operator to maintain the device
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Voice Tracking Mode

Setting the Voice Tracking Mode

For the VPT300 that is connected to your endpoint, you can set its Voice tracking mode to Auto, Manual, Autoframe, or Auto without autoframe.

Prerequisites

The video input source of your endpoint has been set to VPT300 under Advanced > Settings > Video > Video Input > Camera type on the remote control UI.
NOTE:

The detailed procedure for setting the video input source, as well as VPT300 parameter settings and description, is provided in TE30&TE40&TE50&TE60&TX50 Videoconferencing Endpoint Configuration Guide.

Procedure

  1. Press on the remote control to access the menu screen.
  2. From the option bar, select and press on the remote control.
  3. Set Voice tracking mode to Auto, Manual, Autoframe, or Auto without autoframe and press on the remote control.
Translation
Download
Updated: 2019-01-31

Document ID: EDOC1000184611

Views: 30097

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next